Nauticstar Legacy Series Owner's Manual page 65

LEGACY SERIES OWNER'S MANUAL
For 2602:
For boats equipped with Mercury engines, two ACR's will be present. This is because Mercury motors do come not come
factory equipped with an isolator plug.
Fuses
For all legacy models with Hardtop Option:
There will be an inline fuse connecting the hardtop wiring harness to the boat. This can be accessed by removing the front
kick panel under the helm.
For 2602 with Mercury Engines:
There will be a 125 amp in-line fuse on the end of positive battery cables between the ACR and Battery. There will be a total
of 3 three fuses.
Breakers
The helm face switch panel comes equipped with an integrated breaker system. The breakers are located just under the
switch and are protected by a rubber nipple. When tripped, the breaker will deploy into this rubber nipple. To reset the
circuit breaker, press down onto the rubber nipple and push the breaker into the circuit. Before resetting a circuit breaker,
inspect the circuit and determine the cause of the trip.
65 |
LEGACY SERIES P a g e