Bridge Clearance; Outboard Engine Mounting Height - Nauticstar Legacy Series Owner's Manual

LEGACY SERIES OWNER'S MANUAL
Length
Beam
Approximate Draft
Transom Height
Deadrise at Transom
Deadrise at Entry
Maximum Horsepower (HP) Rating
Max Persons/ Total Persons Weight
Max Weight Capacity
Approximate Dry Weight (Excluding Motor)
Fuel Capacity*
Lean Post Livewell (If equipped)
Aft Livewell
Port and Starboard Fish Boxes
Aft Fish Box
Aft Cooler
Note: Draft may change depending on motor selection, amount of fuel, and gear added. *The usable fuel capacity will be
affected by factors such as EPA-required fuel system components, temperature, and boat loading which may reduce the
usable fuel capacity by 10%.

BRIDGE CLEARANCE

2102
2302
2602
Note: The bridge clearance height is an approximation and can change depending on several factors. Always approach any
bridge or overhead obstacle slowly and with caution. It is the operator's responsibility to ensure their boat will pass safely
under any obstacle.

OUTBOARD ENGINE MOUNTING HEIGHT

Outboard engine mounting is adjusted to the second hole from the top on all Legacy models.
LEGACY SERIES
2602 LEGACY
25' (7.62 m)
102" (2.59 m)
15" (0.38 m)
25" (0.64 m)
o
20
o
45
400 HP (298 kW)
12/ 2500 lb (1134 kg)
3500 lb (1588 kg)
4000 lb (1814 kg)
139 Gal (526 L)
21 Gal (79 L)
30 Gal (114 L)
25 Gal (95 L)
50 Gal (189 L)
18 Gal (68 L)
Bridge Clearance Height (With Hardtop)
7' 10" (2.39 m)
8' (2.44 m)
8' 2" (2.49 m)
52 |
P a g e