Propulsion - Nauticstar Hybrid Series Owner's Manual

HYBRID SERIES OWNER'S MANUAL
Auto Bilge
The Auto bilge pump will always be powered and automatically switch on when the water level in the bilge is high enough to
raise the float. The auto bilge pump will activate a light on the switch panel when it is running, and the switch panel is
located on the helm face. The auto bilge pump is also able to be manually controlled. The manual control switch is located
on the switch panel. Unless manual control is desired, the auto bilge switch should be set in the "auto" position.
Manual Bilge
A secondary manual bilge pump will also be present if the option was selected. This bilge pump will be located adjacent to
the auto bilge pump. This bilge pump can be operated by an additional switch on the helm switch panel.

PROPULSION

NauticStar boats come factory equipped with Yamaha and Mercury engines. Please refer to their specific owner manuals
for information. These owners' manuals are included with the purchase of your boat. A digital version and additional
information can be obtained at:
Yamaha
https://yamahaoutboards.com/en-us/home/owner-resources/all/owners-manuals
60 |
HYBRID SERIES P a g e