Table of Contents
Advertisement
5. Remove motor/blower assembly from the atomizer.
a. Hold the atomizer in your left hand and press the latch in the direction of the arrow.
b. At the same time hold the motor/blower handle assembly with your right hand and rotate it
counterclockwise 90 degrees.
c.
Pull out to remove the motor/blower from the atomizer.
6. Screw filled disinfectant container onto the atomizer.
7. Connect atomizer body with motor/blower.
a. Hold atomizer body in your left hand and align the slot on the atomizer with the slot on the motor/blower
and insert (as shown in the figure).
b. Rotate the motor/blower 90 degrees clockwise.
c.
When the atomizer and motor/blower are parallel, the latch button will engage.
Freedom XF102- User Manual
Advertisement
Table of Contents
