TANK automatic key cutting machine TABLE OF CONTENTS 1. Safety precautions and warnings 2. General information 2.1 Machine description 2.2 Machine characteristics 3. Product packaging checklish 4. Overview 4.1 Specification 4.2 Software overview 4.2.1 Introduction 4.2.2 Smart phone operation system 4.2.3 Software update 5.
Page 2
TANK automatic key cutting machine 1. Satefy precautions and warnings To avoid injuries to operators and damages to machines,please read this product user manual carefully before you start and follow the safety notes listed below: Always use the machine under safe environment ...
All the information and illustrations in this document are for guidance only. 2M2 R&D Reserves the right to alter products designs,dimensions or info to improve the products quality.The contents of this document are fully protected by Copyright and may not be copied or reproduced in any form(e.g.
Page 4
TANK automatic key cutting machine www.obdii365.com...
Page 5
TANK automatic key cutting machine Optional Accessories as beblow: www.obdii365.com...
TANK automatic key cutting machine Input voltage 110V ~ 220V Input frequency 60/50Hz Power DC 24V/5A Power parameter 200W Battery capacity 4500mah Principal axis rotation speed 10000rpm Batter capacity 22V.90Wh Working temperature 0-50° Humidity 10-90% Net weight 10.8KG Gross weight 15.6KG Machine size 25*29*35(CM)
TANK automatic key cutting machine Installation steps: 1) Put the cutter into the cutter mounting hole and push the cutter to the limit. 2) Push the probe into the probe mounting hole and finish operation depend upon APP guide. Uninstallation steps: 1) Unscrew the locks for cutter and probe counter-clockwise until they are loosened off.
TANK automatic key cutting machine 5.4 Super key blank 5.5 Operation instructions on App The system needs to initialize for first use.The steps as follows: 5.5.1 Install cutter & probe www.obdii365.com...
TANK automatic key cutting machine 5.6 Online update App will update automatically if mobile phone connect the network. Firmware will update automatically if mobile phone connect by bluetooth. www.obdii365.com...
5.8 Warranty and after-sale service 2M2 TANK key cuttting machine has a warranty of 2 years for warranty.Any time if you have problem, only leave a message to the distributor or after sales service,we will try our best to solve the problem that you meet.