2M2
TANK automatic key cutting machine
Installation steps:
1) Put the cutter into the cutter mounting hole and push the cutter to the limit.
2) Push the probe into the probe mounting hole and finish operation depend upon
APP guide.
Uninstallation steps:
1) Unscrew the locks for cutter and probe counter-clockwise until they are loosened
off.
2) Take the cutter or probe off when it is loose.
5.3 clamp Introduction
Pictures of clamp
Standard clamp(flat key & laser key,special keys HU162T, Toyota smart key)
HU64 clamp
FO21&TIBBE clamp
www.obdii365.com