1. Manuals
  2. Brands
  3. 2M2 Manuals
  4. Cutter
  5. TANK 2 PRO
  6. Manual

2M2 TANK 2 PRO Manual

Cnc key cutting machine
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
TANK 2 PRO
CNC KEY CUTTING MACHINE
MANUAL
2 P r o
01

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TANK 2 PRO and is the answer not in the manual?

Questions and answers

Related Manuals for 2M2 TANK 2 PRO

Summary of Contents for 2M2 TANK 2 PRO

  • Page 1 TANK 2 PRO CNC KEY CUTTING MACHINE MANUAL 2 P r o...

  • Page 2: Table Of Contents

    Table of contents 1、 Safety precautions and warnings 1-1Power supply precautions …………………………………………04 1-2Installation precautions ……………………………………………04 1-3User precautions …………………………………………………04 1-4Other precautions …………………………………………………04 2、 General information 2-1 Machine description ………………………………………………05 2-2Machine characteristics ……………………………………………05 3、 Product packaging checklist ……………………………………06 4、 Overview 4-1 Structure diagram …………………………………………………07 4-2 Specification ………………………………………………………08 4-3 Software overview …………………………………………………10 4-4-1 Introduction ……………………………………………………11...
  • Page 3 8、 How to use ‘Key database’ ………………………………………27 9、 How to use ‘All key lost’ …………………………………………29 10、 How to use ‘Find bitting’ ………………………………………30 11、 How to use ‘Universal key duplicate’ ………………………31 12、 How to generate key blank? ………………………………33 12-1 How to use ‘generate key type’ ? ………………………………33 12-2 How to customize key blank? …………………………………34 13、...

  • Page 4: 1、 Safety Precautions And Warnings

    1、 SAFETY PRECAUTIONS AND WARNINGS 1-1 Power supply precautions ●Do not use damaged wires or loose socket. ●Do not plug more devices at the same socket. ●Do not pull wire or touch the metal part of power supply. ●Unplug the machine when it is not in use for a long time. ●If any problem happens,please contact technique support.

  • Page 5: 2、 General Information

    2、 GENERAL INFORMATION 2-1 Machine description Dear customer,thank you for using 2M2 tank automatic key cutting machine,it is a portable and light weight,especially designed for lock- smiths in the world to work outdoor.To avoid injuries and damages to the machine,please use the machine correctly according to product user manual.Please read the manual carefully before you start to use the...
  • Page 6 3、 ＰACKAGING LIST PICTURE ACCESSORIES QUANTITIES * Subject to actual product 1.5 cutter 1 each 2.0 cutter Probe Power adapter Power cord Brush Blow 1 each Pressing tool Stopper Screw 2 each 4.0mm Hexagon bar wrench 2.0mm Hexagon bar wrench 2.5mm Hexagon bar wrench Belt for motor...

  • Page 7: 4、 Overview 4-1 Structure Diagram

    4-1、 OVERVIEW...
  • Page 8 4-2、 PART NAME Mobile phone bracket Mask Protective shell for motor Lighting Protective shell Protective cover Power Switch Turn rigtht /Press Drawer for particles Storage for probe(left) Battery and FO21 fixture are optional （ ） FO21 port Probe Cutter Multi-funciton standard clamp Cover Base...
  • Page 9 Handle Rear cover Power supply （24V/6A）...

  • Page 10: Specification

    4-3、 SPECIFICATION I n p u t v o l ta g e 1 0 0 - 2 4 0 V A C I n p u t f r e q u e n c y 5 0 - 6 0 H z Po w e r 1 4 4 W Po w e r p a ra m e t e r...

  • Page 11: Software Overview

    4-4、 SOFTWARE OVERVIEW 4-4-1 Introduction ● Supporting self-calibration ●Supporting key duplication and cutting for vehicle/motorcycle/household keys ● Supporting universal key decode for multiple key types ● Operation on APP through Bluetooth ● Build-in key database 4-4-2Smart phone operation system ●Android： Android 5.0 and above version ●iOS:iOS12.0 and above version 4-4-3 Software update ●Online update on APP...

  • Page 12: 5、 Installation Instruction

    5、 INSTALLATION INSTRUCTION 5-1 Cutter and probe installation： Insert cutter and probe onto the top depend on the arrow,and then use 2.5mm hexagon bar wrench to lock the screw. Notes: when pushing both cutter and probe onto the top,probe Height is higher than cutter height.

  • Page 13: Clamp Installation

    5-3、 CLAMP INSTALLATION Picture 1 Picture 2 Installation steps： Unscrew the lock for the clamp,insert the clamp along the rail depend on the arrow(picture 1). and then use 4mm hexagon bar wrench to screw the lock(picture 2).

  • Page 14: Standard Clamp Guide

    5-4、 PICTURES OF CLAMP C Clamp Supporting types： Standard key Flat key Inner groove key 2 tracks Inner groove key 4 tracks Sided groove key 2 tracks Sided groove key 4 tracks F Clamp （FO21/TBE1） Standard key Crucifix key Snake key Dimple key Supporting types: Dimple key...

  • Page 15: Clamp Range

    5-5、 FIXTURE GUIDE Key types Key types Clamping method Clamping method Standard key Standard key Crucifix key Flat key Inner groove Snake key key 2 tracks Inner groove Dimple key key 4 tracks Sided groove Dimple key key 2 tracks Sided groove FO21/TBE1 key 4 tracks...
  • Page 16 6、 KEY INSTALLATION Flat key(with shoulder): use stopper to against the shoulder and install the key on the right. Flat key: Align the key with the 1st line. pay attention,please ignore it if the key is too short to reach the first line. Standard key: Please operate depending on the guide picture.
  • Page 17 Laser key(with shoulder): Special installation: Please install the key shoulder install HU66 on the right,put key against the clamp,such as shouler against the clamp. HU66/SIP22. Thin laser key(with shoulder)(thickness <2.8mm)： install the key on the right,put key shoulder against the clamp. Laser key: Special installation: please align the key tip with the...
  • Page 18 Smart key: please install the key depending on the picture and align the tip with the 4th line. HU101 special installation: The key tip must overpass the 1st line and stay between 1st and 2rd line. The key tip of HON77 must align with the edge of the clamp depending on the picture.It can not be cut if the key is too short to reach it.
  • Page 19 Part D: install the key depending on the guide picture. HU162T key: install the key(side A) and align the tip with 1st line.The key has a goove on the side B.please ignore if the key is too short to reach the 1st line.
  • Page 20 Snake key: If it's the key with shoulder, please use the stopper to be against the shoulder,if not, please align the tip with the 1st line. Dimple key: Please align the tip with the 1st line. Dimple key: Please install the key on the right and align the tip with the 1st line.
  • Page 21 FO21/TBE1: Please insert the key till the end and use the small tool to keep the key balance. Please install the key depending on the guide picture： The key has to align the tip with the 1st line(if the key is not long enough,it may not reach the 1st line,the machine can look for the tip automatically.If it's the key with shoulder,it has to align the shoulder with the 4th line.Please use the stopper to locate the shoulder.But...

  • Page 22: 7、 Operation Instructions On App

    7、 OPERATION INSTRUCTIONS ON APP 7-1、 How to download the Tank APP? App Store Google Play Scan QR code Search' MagicTank' in Search' MagicTank'on Google Play. App Store for iPhone . MagicTank MagicTank 7-2、 How to sign up ? 1.Please register 2.Please sign up via phone number.

  • Page 23: Bluetooth Connection

    7-3、 Bluetooth connection 1.Click bluetooth logo. 2.Click bluetooth switch and 3.Connection is ok. then click series number.

  • Page 24: Height Level Adjustment

    7-4、 Height level adjustmen. （*Required calibration after receiving a new machine.) 1.Enter 2M2 TANK APP and click 2. Click ‘change cutter & probe’ . ‘Device information’ . 3.Installation and then 4.Loosen off the screw 5.click “ OK” . click “ OK” .

  • Page 25: Clamp Calibration

    7-5 、 Clamp calibration （*Required calibration after receiving a new machine.) 1.Enter 2M2 TANK interface,click “ settings” . 2.Click “ clamp options” 3.Select clamp depend 4.Please check the clamps 5.click “ OK” . on your current clamp” . for looseness.

  • Page 26: 7-6Cutting Calibration

    7-6、 Cutting calibration （*Required calibration after receiving a new machine.) 3.Please confirm the 1.Click “ settings” . 2.Click “ Cutting calibration” cutter 2.0mm --ok. 4.Install HON66 key blank 5.Clean the particles ( 25# ) on the left (pay and click “OK” attention, the tip has to be （The key continues to be 6.click “...

  • Page 27: 8、 How To Use 'Key Database

    8、 How to use ‘Key database’ ? （ Buick as sample) 1.Click ‘Key database’ . 2.vehicle data 3.Select Model - Buick 4.Choose a car - Delta 5.Selection process 6.Select key type HU100 （See if the key needs to be counter-clamped）...
  • Page 28 7.Install the key on the left 8.Click “ Identify” 9.Click ‘Continue’ (pay attention,please align the tip with the 1st line). 10.Click “cut” .

  • Page 29: 9、 How To Use 'All Key Lost

    9、 How to use all key lost （ Toyota as sample） 1.Enter 2M2 TANK APP 2.Select Model - Toyota 3.Input’ lock number’ - and click ‘All key lost’ Search. 5.Install the key on the right (pay attention,please align 6. Click “cut” .

  • Page 30: 10、 How To Use 'Find Bitting

    10、 How to use ‘ Find bitting’ ？ （ Toyota as sample) 1.Enter 2M2 TANK APP 2.Select Model - Toyota 3.Choose a car series-Corolla and click ‘Find bitting’ 4.Select year 2000-2014 5.Install the key on the right TOY43. (pay attention,please align...

  • Page 31: 11、 How To Use 'Universal Key Duplicate

    6.Input door bitting and 7.If key bitting appear, and then click ‘Find bitting’ . then cut it one by one. 11、 How to use ‘universal key duplicate’ ? (Inner groove key 2 tracks as sample) 1.click ‘Universal key 2.Select key type 3.Select Alignment duplicate’...
  • Page 32 4.Please select 5.After cleaning the key 6.click ‘identify’ . depending on the - next step. thickness of the key. 8.Install the key on the left 7.OK 9.cut (pay attention,please align the tip with the 1st line).

  • Page 33: 12、 How To Generate Key Blank

    12、 How to use generate key type? 3.Enter the key you want 12-1、 Generate key type (HU100 as sample） to make HU100 and 1.Click ‘ generate key type’ . 2. ‘Laser key blank’ select the programme. 6.Place the key in the C-clamp block and align 4.

  • Page 34: How To Customize Key Blank

    12-2、 How to DIY key blank？ (HU66 as sample) 1.Click’ Generate key type. 2.Customize key blank’ . 3. Selecting measure- ments to create a model. 4.Select Positioning Type 5.Selection of upper 6.Fill in the data - Next edge grooves...
  • Page 35 7.Fill in the data - Next 8.Fill in the data - Next 9.Fill in the name - brand - click save (Save and choose whether to exit or continue as needed) 10.Follow the prompts to 12.Place the key in the 11.Select “cutting for prepare the key supermodel C-clip block with the end...

  • Page 36: 13、 Diy Key

    13、 How to use ‘ DIY key’ ? (Hu66 as sample) 3. Select key type. 1.Click “ DIY key” 2.Click “ DIY key by measuring ” 6.Input key thickness, Depth and other inform- 4.Click ‘ Shoulder’ 5. Position A (>2.8mm） ation after measuring , and then click ‘next’...
  • Page 37 8.next 9.Tooth depth option 4 7.Selection of tooth position - input of tooth position value - automatic calculation - automatic calculation - next step - next step. 11.Fill in the key name, 12. Choose to exit or brand,Embryo number continue processing 10.Next - Click Complete.

  • Page 38: 14、 2 In 1 Decoder

    14、 2 IN 1 DECODER 14-1、 How to use ‘2 in 1 decoder’ ? (HU162T-9 cuts as sample) 1.Click ‘ 2 in 1 decoder ’ 2. ‘HU162T-9 cuts’...
  • Page 39 3.Input the key cuts that you decode via 2 in 1 decoder. 4.Enter the angle and tooth number and click on Convert Tooth Number. 5.Click ‘Cut key’ .
  • Page 40 7.Click on Side A - Cutting 6.Install the key on the left (pay attention,please align the tip with the 1st line). 点 击 继 续 8.Click ‘B’ ---’ cut’ 9. Click ‘C’ ---’ cut’...

  • Page 41: Hu162T-10 Cuts

    14-2 HU162T-10 cuts 1.Click ‘2 in 1 decoder’ 2. ‘HU162T-10 cuts’...
  • Page 42 3.Input the key cuts that you decode via 2 in 1 decoder. 4.Enter the angle and tooth number and click on Convert Tooth Number. 5.Click ‘Cut key’ .
  • Page 43 7.Click on Side A - Cutting 6.Install the key on the left (pay attention,please align the tip with the 1st line). 8.Click ‘B’ ---’ cut’ 9. Click ‘C’ ---’ cut’...

  • Page 44: Toy43

    14-3 TOY43 2.Enter TOY43 in the search box and 1.Click’ 2 in 1 decoder’ select the corresponding programme. 3.Please input the key cut that you decode by 2 in 1 decoder. 4.Click ‘ cut keys’ .

  • Page 45: App Update

    5.Install the key on the right (pay attention, 6. Click on Cutting after please align the tip with the 1st line). getting the tooth number. 15、 UPDATE 2.Check whether the local version 15-1 APP update and the server version are the same, the server version is the main, incon -sistent points upgrade.

  • Page 46: Update Key Database

    15-2 Update key database 1.Long press on 3.Downloading. 2.click” OK” database version . 15-3 Firmware update 1.Click version number that circled and then click the first one for updating. -click “ ok” .

  • Page 47: 16、 Maintenance

    16、 MAINTENANCE ●Please clean the area around clamps with a brush before the machine starts to work.This is to assure cutting precision and avoid components damage by metal particles. ● To avoid damage or corrosion to the machine,please do not use detergent or other cleaning products to clean the machine.

  • Page 48: 17、 Warranty

    Address： Date of purchase： Description of the problem： Certificate of Conformity Pseudolaric acid： Tank CNC machine Product Model： TANK 2 Pro Inspector： Makers： Magic Star (Shenzhen) Technology Co. Address： 301,3rd Building， 28# Junhua North Road, Sanlian Community Longhua street， Longhua District Shenzhen.

Table of Contents