Airgain AirgainConnect AC-HPUE Troubleshooting Manual
Ethernet injector
Hide thumbs
Also See for AirgainConnect AC-HPUE:
- Quick start manual (2 pages) ,
- User manual (37 pages)
Related Manuals for Airgain AirgainConnect AC-HPUE
Summary of Contents for Airgain AirgainConnect AC-HPUE
- Page 1 AirgainConnect™ AC-HPUE User Guide AirgainConnect™ AC-HPUE & Ethernet Injector AC-EI Troubleshooting Guide 12/7/2020 Version 1.0...
- Page 2 This document is the Troubleshooting Guide for the AirgainConnect™ AC-HPUE products marketed and sold by Airgain, Inc. For a more complete document on how to install and use the AirgainConnect AC-HPUE, please refer to the User Guide. This guide and the subject matter it contains are protected by copyright laws under the Copyright Act of 1976, as amended, and all copyrights in this guide are the exclusive property of Airgain, Inc.
- Page 3 A 5A slow blow inline fuse is recommended for overcurrent protection. • A vehicle power-block, or regulated power supply may be where the inline fuse is located. ❐ Power-source wire is in good condition. ❐ Power plug is not damaged or faulty. © Airgain, Inc. 2020. All Rights Reserved.
- Page 4 EI LED will blink red, then blink green, then solid blue when it re-initializes the Modem. Contact AT&T/FirstNet to verify the SIM is activated and has HPUE data-plan. © Airgain, Inc. 2020. All Rights Reserved.
- Page 5 USB Port: Ethernet Injector & AC-HPUE User Experience: The Ethernet Injector has no connection to the USB port of the AC-HPUE. Check the following: ❐ Verify EI LED is illuminated, any color, to insure the EI is powered. © Airgain, Inc. 2020. All Rights Reserved.
- Page 6 Verify USB port is not physically damaged. ❐ Verify USB cable is in good condition and not damaged or faulty. ❐ Verify USB cable connector is fully inserted and secured in place with the screw. © Airgain, Inc. 2020. All Rights Reserved.
Need help?
Do you have a question about the AirgainConnect AC-HPUE and is the answer not in the manual?
Questions and answers