Ikan PT1000 Quick Start Manual

Q
uick Start Guide
Step
Step 1 "Mount the Monitor"
a. Attach the monitor bracket to the back of
the monitor using the t-channel mount.
b. Attach the mounting rod to the shoe mount of
of your camera.
e. Place the end of the mounting rod into the top
mounting hole of the monitor bracket and
tighten the knob on the top of the bracket to hold
it in place.
Step 2 "Connecting the VGA"
a. Plug the A/V cable to the bottom of the monitor
b. Connect the VGA cable's mini din connector to
the mini din connector on the A/V cable.
c. Plug the 15 pin connector of the VGA cable to
the secondary monitor port of your computer.
d. Start your computer and set it up for dual monitors
e. Set your secondary monitor to 800X600 resolution
Step 3 "Install Prompting Software"
3903 Stoney Brook Dr. Houston, TX 77063
Phone: 713-272-8822, Fax: 713-272-8822
· 1a
.
· 1b
.
· 1c
.
Whats Included
·
1- V8000 Monitor
·
1- A/V Cable
·
1- VGA Cable
·
1- Mounting Rod
Q&A
1. Q: What is the warranty on the monitor?
A: 180 days after purchase
2. Q: Where can I find the manual to the monitor?
A: You can download it at www.ikancorp.com
Download the Enti r e Manual at ww w .ikancorp.com
PT1000
·
1- Prompting Software
·
1- Remote Control
·
1- AC adapter
·
1- Monitor Bracket