Page 1
Quick Start Guide PT19-TM Talent Monitor Add On Kit for PT4900 What’s Included 1 x Teleprompter Monitor w/ Aluminum Chassis 1 x Power Adapter with Cable 1 x VESA Monitor Mount 1 x 15mm Rod Adapter 1 x Mounting Knob...
Assembly Steps Setting Up the Talent Monitor Using the shorter 4 x 10mm Screws, attach the VESA Monitor Mount. Make sure that the long end of the VESA Monitor Mount is pointing in the direction of the power button like the image above. Use the Mounting Knob to tighten the 15mm Rod Adapter to the VESA Monitor Mount. Setting Up the Teleprompter Monitor (Monitor from the PT4900) If the mounting brackets where previously installed on the teleprompter monitor, remove those screws.
Page 3
Attaching the Talent Monitor After both the talent monitor and teleprompter monitor are set up, slide the talent monitor on to the PT4900. *WARNING* We recommend at least 1 inch of rod should be left inside the teleprompter base. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com because we’re filmmakers too...
1920x1080psf @ 24, 25, 29.97, 30 Hz 1920x1080p @ 23.98, 24, 25, 29.97, 30, 50, 59.94, 60 Hz Optional Accessories Some other products that work well with this item available from Ikan include: PT4900 19” High Bright Beam Splitter Teleprompter www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...