Operation - Ikan V7000 User Manual

Power On/Off/Standby (Attention: Make sure the terminal electric poles of the
power plug are as follows: the inner pole"+" and the outer"-"
The input voltage of the unit is DC 12V, you must use the AC Adapter enclosed.
You can also use the DC 12V car adapter..
After connecting to power, the display will be in standby mode. Press the
"POW" button on the display or "POWER" button on the remote control, the
display will then turn on, press the same buttons again and the display will re-
turn to standby mode.
1. Menu Operation
Press the button "MENU" on the display or remote control, when the "main
menu" appears on the screen, press -/+ on the display or V-/V+ on the remote
to choose between the different menus use the CH-/CH+ on the display or
remote to select an item (the currently selected item will be highlighted red)
then use -/+ or V-/V+ on the remote again for adjusting the value. Press the
"MENU" key to return to the main menu after you are finished adjusting the
values then press the MENU button once more to exit to the Main Menu. The
menu will exit automatically after 5 to 8 seconds..
2. Select "LANGUAGE" in The MENU
Enter the main menu and by using the -/+ on the display or the V-/V+ on the
remote to choose the "SETUP" option, Use CH-/CH+ key on the Display or
remote to choose "LANGUAGE" in the menu (the currently selected item
will be highlighted red) press the -/+ keys on the display or the V-/V+ keys
on the remote to select which language you prefer. Chinese, English, Russian,
German, or Arabic are availble.
3
Oper at io n