Citizen CT-S801 User Manual page 17

Maintenance cover
Not applicable for this product.
CAUTION
Do not open the maintenance cover.
Operation panel
LED Button 1 to Button 4
Examples are shown in the diagram of the LCD above on the right.
LCD
Indicates the printer's status, button names, types of errors, and messages.
LED
Lights green when the power is on, turns off when the power is off.
Lights red in special modes and in case of errors.
Lights orange when paper is low (paper near-end) or the print head is hot.
Button 1 to Button 4
Functions assigned to these buttons vary depending on the active mode. The
buttons are called button 1, button 2, button 3, and button 4 in order from left
to right.
FEED button
Press this button to feed paper.
In case of a cutter lock, remove the cause of the lock and then press the FEED
button.
MENU button
Press and hold this button (for at least two seconds) to access the memory
switch setting mode.
PAPER LOW
Appears when the paper roll is near its end.
LCD
Refer to 5.3 Manual Setting of Memory Switches
LOCK icon
Button 1 (FEED)
Refer to 4.6 Error Messages
— 13 —
PAPER LOW
Button 4 (MENU)