Page 1
2.1CH Dolby Soundbar System Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio,and the double-D symbol are trademarks of Dolby Laboratories.
Important Safety Instruction Thank you for purchasing thehome theater D2 Soundbar. Please read this user manual carefully and keep for future reference. Warning Caution: To reduce the risk of electric shock, do not dismantle the product and do not expose the apparatus to rain or moisture.
6. The unit should not be impeded by covering the ventilation opening with items such as newspaper, table-cloths, curtains etc. Make sure that there are at least 20 cm of space above and at least 5 cm of space on each side of the unit. 7.
10. Refer all servicing to qualified service personal. Servicing is required when the apparatus has been damage in any way, for example, when the power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Important Notes • This sound bar was especially developed for LED/LCD/Plasma TV's: It should not be used in combination with CRTTV's (Cathode Ray Tube TV's) in order to avoid image interference. • Safety and operating instruction manual should be retained for future reference. •...
Product Diagram Wired connection Subwoofer HDMI(ARC) LED DISPLAY Power/Standby SW OUT VOL+ VOL- OPTICAL AC IN...
Page 7
2.1CH Dolby Soundbar System Manufactured under license from Dolby Laboratories. Dolby, Dolby Audio,and the double-D symbol are trademarks of Dolby Laboratories. USER MANUAL(1)
2. PAIR: Connect or disconnect to the pairing device. (Press the button more than 2 seconds). 3. Volume+: Master volume up : Pre button: Previous program (Only work under USB & BT mode of smartphone). 5. Volume - : Master volume down 7.
Page 9
Mount on the wall WARNING: If you don’t feel confident to correctly and securely wall-mount the sound bar, Seek the assistance of an experienced person of professional. Install the speaker on a vertical, fast, reinforced area of wall. For plaster walls, it is recommended to screw into wall studs for greater security.
OPERATE INSTRUCTIONS Setting the Soundbar 1: Plug in the power cord and the display will light up (Standby mode) 2: Switch on the soundbar by using power button on soundbar or by using STANDBY button on remote. After switching on, the default input mode will appear on display 3: lnput mode can be changed by pressing the power button again or by using the INPUT button on remote News mode 3D mode...
Page 11
1. Turn on sound bar and then short-press the multi-function button to switch to BT mode 2. Activate the pairing function on your phone of other compatible device and select“D2” 3. When successfully paired, you will hear a tone and the LED display will stay on 4.
Page 12
Optical Mode Use this operating mode to play music from the optical digital input for example from a TV on your soundbar (A). The TV must have an optical digital output. Use the optical cable supplied to make the connection. Proceed as follows: •...
The bluetooth reception is poor. Move the device closer to the soundbar, or remove any obstacle device connects and between the device and the soundbar. disconnects constantly Remark: Once additional information needed, please kindly contact support@pheanoo.com, we will support you in shortest time.
Need help?
Do you have a question about the D2 and is the answer not in the manual?
Questions and answers