Fisher & Paykel CH Manual

CH & CHP models - User preference settings
User Preference settings allow you to adjust the rinse aid level and turn the beeps on or off.
To adjust the Rinse Aid Level
1. Press
to turn the dishwasher on.
2. To enter the User preference settings, press and hold Delay and
together until:
• The display shows the current Rinse Aid setting (the default is
).
• CH model: The Heavy indicator will flash and the Normal indicator will be steadily lit.
• CHP model: The Auto indicator will flash and the Heavy indicator will be steadily lit.
3. Press Delay to change the Rinse Aid setting in steps between
(minimum dispense) and
(maximum dispense).
4. To exit the Rinse Aid menu, press
.
To turn the Beeps on or off
1. Make sure the dishwasher is on.
https://producthelp.fisherpaykel.com/au/Clean/Dishwashers/DW60CHW1/User_Guide_DW60CHW1/07_CH_and_CHP_mode...
Updated: Thu, 11 Nov 2021 20:25:13 GMT
Powered by
1