Audeara A-01 Quick Start Manual

3. ACTIVATE DISCOVERY MODE
In order to pair the headphones with
your device, you must first put them
in to discovery mode. You must be
using Bluetooth to create your hearing
profile through the Audeara app.:
1. TURN HEADPHONES ON
Turn headphones on by flicking the
power switch up on the left ear cup.
The blue indicator LED will start flashing.
2. ACTIVATE PAIRING
Hold down the multifunction button
for three seconds. The LED indicator
Multifunction Power
will start flashing blue and red and you
button on/off switch
will hear the headphones say "pairing
mode active".
1. CHARGE THE BATTERY
1. INSERT CABLE
Connect the headphones to
a USB power source to charge
the internal battery. Time to
fully charge is 6 hours.
2. CHARGING
While the headphones are
charging, the LED indicator
will be RED.
3. FULLY CHARGED
When charging is complete,
the LED indicator will be BLUE.
Note: You will be unable to listen to your headphones while they are charging
due to International Safety regulations.
A — 01
Quickstart Guide
audeara.com