Subscribe to Our Youtube Channel
Related Manuals for ATLAS TRAP AT 400
Summary of Contents for ATLAS TRAP AT 400
- Page 1 AT 400 SAFE OPERATING MANUAL IMPORTANT READ OPERATING MANUAL BEFORE OPERATING TRAP FOR PARTS AND SERVICE CALL HOWELL SHOOTING SUPPLIES 334.393.2843 www.howellshootingsupplies.com...
- Page 2 Remove trap from packaging. Inspect packaging and make sure there is no damage. If any damage has occurred during shipping, contact the freight carrier and Atlas Trap Co. Mount trap to sturdy base. Always stand at rear of trap, never on either side or in front.
- Page 3 Load 108mm targets into magazine. The spring has already been installed in your new AT400. The spring is adjustable to throw from 40- 100 yards. Should you decide to loosen or tighten the spring you will need a 5/8” wrench or deep- socket.
- Page 4 WIRELESS REMOTE 1 – 12 Volt Transmitter 1 – 12 Volt Receiver LT-100 To connect the wireless remote to your Atlas Trap: 1. Find a suitable location to mount the receiver. 2. Plug in male adapter at rear of trap.
- Page 5 SAFETY PRECAUTIONS Stand to rear of trap. Stay clear of throwing arm path, which is 360°. If toggle is in the up position, trap will immediately cock. If toggle is in the down position, trap can still fire if firing mechanism is pressed.
- Page 6 DISCLAIMER: Atlas Trap Co., Inc. liability under this warranty shall be solely limited to repair or replacement of products or components within the warranty period. Atlas Trap Co., Inc. or its officers or employees shall not be liable under any circumstances for consequential or incidental damages including but not...
Need help?
Do you have a question about the AT 400 and is the answer not in the manual?
Questions and answers