IOGear Combo ION GHE125C User Manual page 20

ION™ Drive Setup
FireWire Installation Cont.
Step 3. Plug the FireWire 6 pin connector into your computer's FireWire Port.
(if your computer only has a 4 pin FireWire or iLink® connection please us a FireWire 4 pin(m) to 4 pin(m) cable. IOGEAR part # G2L13944-6 ; or
you may pick one up at any local electronics store or catalog reseller.)
Step 4. Plug the power adapter into a surge protector.
Step 5. Once complete, turn the ION™ Drive and your computer on. Your computer will automatically identify the
ION™ Drive and load all necessary drivers.
18