SwitchBot Contact Sensor User Manual

Hide thumbs Also See for Contact Sensor:

Table of Contents

Download this manual

1.In the Box

Contact Sensor x 1

AAA batteries x 2

magnet x 1

Sticker x 1

Note: The visuals used in this manual are for reference only. Due to the future updates and

improvements of the product, the actual product images may diﬀer.

LED Indicator Light and Light Sensor

Button and Fresnel Lens

Magnet

A smartphone or tablet with Bluetooth 4.2 or above

Download the SwitchBot app

Create a SwitchBot account and sign in

Remove the release paper behind the main body and the magnet, stick it on the door frame or

window frame, and press for more than 60 seconds. Note that the two parts need to be aligned

at the bottom

Table of Contents

Do you have a question about the Contact Sensor and is the answer not in the manual?

Page 1 3.Preparation A smartphone or tablet with Bluetooth 4.2 or above Download the SwitchBot app Create a SwitchBot account and sign in 4.Installation Remove the release paper behind the main body and the magnet, stick it on the door frame or window frame, and press for more than 60 seconds.
Page 2 Installation Tips: Make sure the sensor is not pointing to appliances or heat source in order to reduce interfer- ence and to avoid false alarms. The sensor senses up to 5m away and up to 90°, horizontally. 45° 45° The sensor senses up to 5m and up to 60°, vertically. 5.Initial Setup 1.Remove the back lid of the sensor.
Page 3 Support Email: support@wondertechlabs.com Feedback: If you have any concern or problem when using our products, please kindly send feed- back from the Proﬁle> Feedback page in the SwitchBot app. 10.FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.Any Changes...
Page 4 and used in accordance with the instructions, may cause harmful interference to radio communica- tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment oﬀ...