CONTENTS: Section 1.0 Introduction and Notice Parts Supplied With The Unit Section 2.0 Uses Section 3.0 Usage How To Use and Activate the Toucan III Unit Safety Instructions Section 4.0 Caution Use Only As Directed Directions for Safe Use Water quality Important Information Section Section 5.0 Important infomation...
Page 3
Each unit is manufactured to ensure safety and reliability. Before using this unit for the first time, please read this instruction manual carefully and keep it for future reference. These instructions will show you how to use the Toucan Eco III unit safely and protect you from danger or damaging the unit.
Section 2.0 Parts Supplied With The Unit Jug for activation 1000ml (1 litre) Base station (press button once: 5 min activation cycle / auto control) Transformer and Power Supply (Input 100~240V 50~60Hz, Output DC 9V 3A) Salt Measuring Spoon (2gm) Portable Spray Bottle Salt additive (Starter Kit) Long spoon for mixing additives...
Section 3.0 Uses 3.1 Use Toucan Eco III disinfectant is generated from natural salt dissolved in tap water, and activated in the Toucan Eco III unit through Electro Chemical Activation. You can make 1000ml of high-level Hypochlorous containing solution in 5 minutes...
3.3 How to use and activate the Toucan Eco Ⅲ Unit Fill the jug with tap water to the 1 litre mark. The water should be between 5 to 35⁰ C, and do not use purified water Add 2g of table salt - that’s a flat measure using the short measuring spoon provided. No more or less as this affects the electrolysis.
Section 4.0 Safety Instructions 4.1 Caution Use Only As Directed Use only for surface and fabric cleaning, disinfection and deodorisation. DO NOT use in an enclosed space. Use only in a well-ventilated area. DO NOT spray into your eyes. In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
Section 5.0 Important Information 5.1 Important Information ALWAYS make sure that the base of the jug and the electrodes in the base unit are clean and dry before activation DO NOT activate or reactive the solution within 3 minutes of the previous activation USE only 2grams of salt per litre DO NOT use Rock Salt as the additive.