FirstBuild FORGE Use And Care Manual page 23

8. Press "Activate Clean Cycle"
button to continue. The light
bar on the bottom of the door
will switch to green, signaling
cleaning mode is active.
9. When the light bar begins
to pulse green, action is
required. Follow the on-
screen prompts.
10. Once cleaning is completed,
drain the reservoir using the
front drain tube. Remove
and discard any ice in the
ice maker. Do not consume
this ice.
11. Fill with 8 cups of fresh water.
Press the "Activate Clean
Cycle" button to continue to
rinse cycle.
12. When the light begins
to pulse green, action is
required. Follow the on-
screen prompts.
13. Complete one more rinse
cycle. Fill with 8 cups of fresh
water. Press the "Activate
Clean Cycle" button to
continue to rinse cycle.
14. Once rinse cycle has been
completed twice, drain the
reservoir and press "Activate
Clean Cycle" button to end
the cycle.
Fig. 4, drain the
reservoir using the front
drain tube.
Fig. 5, press and hold
"Activate Clean Cycle"
button.
Fig. 6, remove lower
shelf and fill reservoir
with 8 cups of clean
water.
Forge Clear Ice Maker 23