Installation And Setup - FirstBuild FORGE Use And Care Manual

INSTALLATION REQUIREMENTS
CAUTION
Lifting Hazard: It is recommended to have two people move and
install the ice maker in order to prevent injury.
To ensure continued protection against risk of electric shock, connect
to properly grounded outlets only.
ATTENTION
Risque lié à la manipulation d'un objet lourd : Nous recommandons
que deux personnes déplacent et installent la machine à glaçons afin
de prévenir les blessures.
Afin d'assurer une protection continuelle contre le risque de décharge
électrique, branchez l'appareil dans des prises correctement mises à
la terre seulement.
• Product is designed to be installed indoors. Do not use your ice
maker outdoors.
• Product must be installed upright on a flat, level surface that is
able to support the total weight when full of water.
• Ensure a minimum of three inch (3") clearance around each side
and one inch (1") clearance in the back of the ice maker for proper
air circulation.
• Install the product in a well-ventilated area with an ambient
temperature between 65°F to 85°F.
• Do not place the product near heat sources such as ovens or
cooktops.
• Do not place the product in direct sunlight.
• Do not place directly under intense countertop lighting.
• Intended for household use only.
• Do not immerse in water.
16 Forge Clear Ice Maker