Specifications - Offroad Living AllSpark PS Series User Manual

Model
Continuous power
Maximum power
Surge power
Output Sine wave
DC cutout (V)
No Load Draw
AC Output
AC Sockets
AC hard wire
terminals
Remote switch panel
1 digital voltage meter shows the output voltage and battery voltage. The battery DC voltage only shows at
Display the startup of the Inverter and when the battery voltage drops to low battery voltage protection level. Three
Efficiency
THD
Output frequency
Isolation strength
Insulation method
Short circuit protection, over load protection, over temperature protection, battery low voltage protection,
Protection
battery over voltage protection, battery low voltage warning
Minimum Cable size
for DC connection
Dimensions

SPECIFICATIONS

(800W – 1200W)
AS-80012IMSW
800W
1000W
1600W
Modified
10.5 Volts (Low) & 15 Volts (High)
240V (+/- 8% in accordance with Australian voltage standards)
Dual 240 Volt 10 Amp Australian standard 3 pin
No
LED indicators shows power, fault & protection
≧1500Vac/1min, Between input and output and the casing
Optical Coupling DC-DC-AC
6B&S
225x150x90mm
AS-100012IPSW
1000W
1200W
2000W
Pure
0.2 Amps
No
Yes – 5m cable
≥90%
THD≤3%
50 Hz±1 Hz
4B&S
245x150x90mm
AS-120012IMSW
1200W
1500W
2400W
Modified
No
3B&S
275X150X90mm