Advertisement

Quick Links

®
AllSpark
Inverters
USER MANUAL
PS Series: Pure Sine Wave
PI Series: Modified Sine Wave
(Next review date 15.12.19)
WELCOME

Advertisement

Table of Contents
loading

Summary of Contents for Offroad Living AllSpark PS Series

  • Page 1 ® AllSpark Inverters USER MANUAL PS Series: Pure Sine Wave PI Series: Modified Sine Wave (Next review date 15.12.19) WELCOME...
  • Page 2 AllSpark is a registered Trade Mark in Australia which has been proudly designed & developed by the team at Offroad Living. Use of this Brand name or Trade Mark without the express permission of Offroad Living is expressly prohibited. Offroad Living is Owned and Operated by a True Blue Aussie family based in Perth Western Australia.
  • Page 3 ® GETTING STARTED WITH YOUR ALLSPARK INVERTER When a motorized appliance or a tool turns on, there is almost always an initial surge of power to start up. This surge of power is referred to as the "starting load" or "peak load". Once started, the tool or appliance requires less power to operate.
  • Page 4 COMPONANT DESCRIPTIONS The follow items describe the components shown on the images on each size of Inverter shown on the previous page. These images are provided for information purposes only. Models may change slightly as a result of product developments and improvements over time. 1.
  • Page 5 INSTALLING AND CONNECT THE INVERTER Your Inverter should not be mounted under the hood of a vehicle or external to the vehicle. It is not waterproof. This Inverter has two DC cable connections, one Positive and one Negative. The order of steps in the following procedure minimizes the danger of sparking near the battery bank.
  • Page 6: Operation

    OPERATION 1. Check the battery voltage to make sure it matches the DC input voltage of the Inverter. Only connect a 12V DC input Inverter to a 12V DC battery or 24V DC input inverter to 24V DC battery. 2. Turn On (“I”) the Inverter. Make certain the overload audible alarm doesn’t sound 3.
  • Page 7: Specifications

    SPECIFICATIONS (800W – 1200W) Model AS-80012IMSW AS-100012IPSW AS-120012IMSW Continuous power 800W 1000W 1200W Maximum power 1000W 1200W 1500W Surge power 1600W 2000W 2400W Output Sine wave Modified Pure Modified DC cutout (V) 10.5 Volts (Low) & 15 Volts (High) No Load Draw 0.2 Amps AC Output 240V (+/- 8% in accordance with Australian voltage standards)
  • Page 8: Troubleshooting

    (2000W - 6000W) Model PI-300012 PS-250012 PS-500024 Continuous power 2400W 2000W 4000W Maximum power 3000W 2500W 5000W Surge power 4800W 4000W 8000W Output Wave Modified Pure Pure DC input(V) 12 Volt 24 Volt DC cutout (V) 10.5 Volts (Low) & 15 Volts (High) 21.0 Volts (Low) &...
  • Page 9: Fault Codes

    TO THE NEW TRIBE MEMBER From the Tribe at Offroad Living, we sincerely thank you for your purchase. We hope this Inverter helps to increase your enjoyment of the great outdoors and gets you “Offroad” more often. If at any time you need further advice on 4wd, camping or caravan products please don’t be a stranger and feel free to hit us up on Facebook https://www.facebook.com/groups/offroadliving/...

Table of Contents