snode SNODE8729 Owner's Manual page 14

ASSEMBLY INSTRUCTION
STEP 4
Put Handlebar post(79) insert Main frame with Knob(77) adjust height. Fix the Handlebar(3) on
Handlebar post using 4 sets of Hexagon screws(4) and Spring washers(5) , then cover the iPad
holder(6) on handlebar(3) . Fix the computer holder(2) on handlebar using Screw, put computer(1)
slip into computer holder, then insert the sensor cable(17) plug into the sensor joint of computer,
And insert the pulse wire(80) plug into the pulse joint of computer.
Now your spinning bike is finished for use.
12