Info Screen - DALGAKIRAN L-8 User Manual

BUTTONS :
START
STOP
RESET
LED (X10), (X100)
WORKING DESCRIPTION :
1- WHEN COMPRESSOR CONNECTED THE POWER SUPPLY. THE DISPLAY SHOWS
2- BY PUSHING THE
PRESSURE .
IN CASE THE PRESSURE REACHES THE SET VALUE, PRESSURE SWITCH GETS OPEN AND THE
SCREEN SHOWS THE BLINKING MESSAGE
TIMER (P15). IF THE PRESSURE SWITCH IS STILL OPEN AT THE END OFTHE COUNTDOWN, MESSAGE
COMES TO BE FIXED
UNLOAD STOP TIMER (P15) RESET.
3- BY PUSHING THE
EVERY TIME THE COMPRESSOR SWITCHES FROM "ON" INTO "OFF" BY THE
SOLENOID VALVE GOES OFF FOR 30 SEC. AND THE SCREEN SHOWS FLASING
WHILE THE MESSAGE IS FLASHING, IT IS POSSIBLE TO RESTART THE COMPRESSOR BY PUSHING
. AFTER 30 SEC. COMPRESSOR SWITCHES OFF, AND SCREEN MESSAGE COMES TO FIXED. THE
MULTIPLICATIVE FACTOR LED "X10" STARTS FLASHING AND THE TIMER SETS ON PARAMETER (P17)
STARTS. DURING THE COUNTDOWN, RESTART IS NOT POSSIBLE BY PUSHING
(P17) IS ELAPSED, LED "X10" SWITCHES OFF.
L8 - CONTROL PANEL

INFO SCREEN

: RUNS COMPRESSOR.
: STOPS COMPRESSOR.
: SHOWS WORKING TEMPERATURE, WORKING HOURS, RESETS ALARMS,
VERIFY THE MODIFICATIONS OF SET VALUES.
: MULTIPLICATIVE FACTOR LED.
BUTTON, THE COMPRESSOR STARTS AND SCREEN SHOWS WORKING
IF THE PRESSURE SWITCH CLOSES DURING THE COUNTDOWN THE
BUTTON, THE COMPRESSOR STOPS AND THE SCREEN SHOWS
LED
RESET
DURING THE COUNTING OF THE UNLOAD STOP
5
START
STOP
.
.
BUTTON, THE LOAD
MESSAGE.
.
WHEN THE TIMER