Important Information; Safety; Safety Instructions; Warnings - Swine Robotics Envirologic EVO Cleaner User Manual

1. Important information

Signs that are used in the manual
Safety-related information is shown in a
grey box marked with a red triangle
Intended use
The robot is designed to be safe to use provided it is operated in accordance with the user manual.
EVO Cleaner is an automatic cleaning robot that is intended to replace manual high-pressure cleaning, for
example cleaning of pens.
Any other use of the robot is inappropriate. If the instructions in this manual are ignored, this could lead to
accidents and harm to people, the environment or animals.
Robot Type
Information in this manual applies to the robot type referred to as EVO Cleaner. A machine plate is attached to
the robot showing the CE mark, robot type, serial number, year of manufacture and other important information,
as shown in Picture 1.
Envirologic AB
Fyrisvallsg. 24
SE-752 28 Uppsala
Sweden
EVO Cleaner
Type
XXXXXXXX
S/N
Manufact.
XXXX
year
Max IN Ambient
210 bar
pressure temp.
24 V
DC-power Weight
Picture 1, machine plate
Restrictions on use
• EVO Cleaner must only be used by trained staff.
• EVO Cleaner must only be used in accordance with the instructions in this manual.

2. Safety

It is important that the use of the robot complies with the safety instructions and warnings in
i
this chapter. Read this even if you are already familiar with the use of the robot.

Safety instructions

In this manual important information is provided regarding safe use and maintenance of the robot.
The user manual should be regarded as part of the product and should be kept accessible.
The robot is designed in conformity with applicable standards and directives. Up-to-date information on these will
be found in the declaration of conformity (CE document). The instructions in this manual must be followed to
ensure that the safety and performance of the robot will be maintained.
If there are other health and safety requirements in the country of use, an appropriate supplement to
i
this manual will be created to meet these requirements.
It is not permissible to remove or modify the design of safety devices on the robot and
accessories.
Only qualified staff are allowed to repair the

Warnings

The safety devices and warning labels on the robot are designed to prevent accidents. The main responsibility for
safe use lies with the persons that are using, maintaining or carrying out repairs on the robot.
To ensure safe use, instructions and warnings should be followed and respected.
Emergency stop switch
As an additional precaution an emergency stop switch is installed, within easy reach on the side of the operator
panel. If the switch is pressed the robot and the water jet will immediately stop.
+1°C - +55°C
270 kg
Important information is shown in a grey
i
box marked with an information symbol
robot.
1