onsemi RSL10 Getting Started Manual

RSL10 Smart Shot Color Camera
Getting Started Guide
Overview
The RSL10 Smart Shot Color Camera (SECO-RSL10-CAM-COLOR-GEVK) is a complete ultra-low-power,
event-triggered, node-to-cloud platform that enables smart image capture for portable, low duty cycle
IoT applications including asset monitoring and event-triggered camera. Based on the RSL10 SIP and the
ARX3A0 CMOS image sensor (color and mono), the platform features multiple trigger modes including
periodic intervals, motion detection, and environmental sensor triggers (e.g. changes in temperature and
humidity). The RSL10 SIP serves as the processing hub of the camera, and Bluetooth® Low Energy
(Bluetooth LE) connectivity enabling remote control and transfer of captured image and sensor data to
the provided mobile app (available on
This guide provides instructions for using the RSL10 Smart Shot Color Camera and accompanying mobile
application. For further information about the platform, refer to the
To get started with the platform, you will need:
RSL10 Smart Shot Camera (SECO-RSL10-CAM-COLOR-GEVK)
•
RSL10 Smart Shot mobile app
•
RSL10 FOTA mobile app
•
Amazon Web Services™ (AWS™) account credentials to use Amazon Rekognition™
•
Hardware Setup
The RSL10 Smart Shot Color Camera kit includes the baseboard PCB, two ARX3A0 IAS camera modules
and a USB cable. By default, the color ARX3A0 IAS module is mounted onto the PCB and the mono IAS
module is bundled with the kit. To use the mono IAS module, swap the module onto the baseboard PCB.
The firmware supports both module, and is capable of automatically identifying the modules. In this guide,
we will be using the color IAS module.
GooglePlay™ , iOS® ).
User Manual.