Installation - Oaks Smart Access Control System Installation Manual

Prior to

Installation

Please ensure that you have the following tools:
●
○ Drill
○ Screw Driver Set
○ Drill Bit Set
Identify the door type and verify that the correct mounting bracket is included.
●
Identify where the power source is for the power supply controller.
●
ADA considerations: Mounting Exit Button and Metal Access Control System at ADA
●
recommended height does NOT guarantee ADA compliance.
Check that all of the components are present.
●
○ Metal Access Control System
○ Exit Button
○ Power Supply Controller
○ Electro-Magnetic Lock Bracket (L type)
○ Single Door Magnetic Lock
○ American Standard Electric Strike (Short Panel)
○ Rently Keyless Smart Home Hub
Individual
This section includes instructions for each component of the Oaks Smart Access
Control System
Components Instructions
Continue to next page
Page 3