Smart wasp X500 Manual
  1. Manuals
  2. Brands
  3. Smart wasp Manuals
  4. Stretch Wrapping Systems
  5. X500
  6. Manual

Smart wasp X500 Manual

M type turntable fully automatic pallet
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
SMART WASP
M Type Turntable
Fully Automatic Pallet
Wrapping Machine
Model：X500
Operation and Maintenance Instructions

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the X500 and is the answer not in the manual?

Questions and answers

Related Manuals for Smart wasp X500

Summary of Contents for Smart wasp X500

  • Page 1 SMART WASP M Type Turntable Fully Automatic Pallet Wrapping Machine Model：X500 Operation and Maintenance Instructions...

  • Page 2: Table Of Contents

    Content 1 Basic Information........................5 1.1 Manual purpose......................5 1.2 To operator........................5 1.2.1 Primary contents....................5 1.2.2 Supplements and other information..............6 1.3 Agreement........................6 1.3.1 Warning......................6 1.3.2 Printing and creation agreement................ 7 1.4 Environmental protection....................7 1.5 Machine label........................ 7 1.6 Additional help and information...................
  • Page 3 2.5 Main operational risk safety warning................16 3 Technical parameter description..................19 3.1 Main component composition..................19 3.2 Control panel.......................20 3.2.1 Main control panel................... 20 3.2.2 Sensor location....................21 3.3 Working principle......................21 3.4 Optional configuration....................22 3.5 Technical parameters and main configuration............22 3.5.1 Institutional parameters..................22 3.5.2 Electrical parameters..................24 3.5.3 Working environment parameters..............
  • Page 4 5.4 Install and replace wrapping film................40 5.5 Place pallet instructions....................42 5.6 First put film operation....................42 5.7 Turn on the equipment....................43 5.8 Turn off the equipment....................44 5.9 Touch screen homepage....................44 5.10 Pause packaging (normal stop)................. 46 5.11 Stop in automatic mode (emergency stop)..............47 5.12 Reset to the origin position..................
  • Page 5 8.2.1 Turntable decomposition diagram and schedule..........73 8.2.2 Column exploded view and detail list..............77 8.2.3 Film carriage exploded view and detail list............. 79 8.2.4 Clamping and cutting film exploded view and schedule......... 85 8.3 Spare and wearing parts....................88...

  • Page 6: Basic Information

    1 Basic Information 1.1 Manual purpose This manual is intended for training professional users and operators. With the help of this manual, you will be familiar with the pallet wrapping machine and its optional functions, enabling you to use, operate, manage and maintain the machine in a safe and effective manner.

  • Page 7: Supplements And Other Information

    1.2.2 Supplements and other information This manual has been carefully written based on our experience and the latest knowledge. Therefore, the information in this manual is valid and correct at the time of publication (see cover). As we continue to improve and develop our products, modifications to the machine are part of the internal process.

  • Page 8: Printing And Creation Agreement

    Notice Used to highlight some information. 1.3.2 Printing and creation agreement · There is always a bullet between lists and enumerations that do not have a specified order. · It must be performed in the order specified by the number in the process. ·...

  • Page 9: Additional Help And Information

    1.6 Additional help and information Smart Wasp is committed to providing the highest level of support to its users and operators. Depending on the product, the support provided mainly includes: · Training · Service management system · 24-hour global support ·...

  • Page 10: Safety Instructions

    2 Safety instructions 2.1 Standards and instructions The machine is designed and manufactured in accordance with the requirements of the Machinery Directive 2006/42 / EC and meets the legal requirements applicable on the date of construction: · Mechanical instruction: 2006/42/EC ·...

  • Page 11: Manual Guidance

    · Please ensure that the working area has adequate light and ventilation. · Dressed correctly. Do not wear loose clothing. Remove jewelry, watches, etc. to prevent them from getting stuck in moving parts. · Please wear protective equipment (e.g. protective clothing, protective shoes, gloves, helmet, goggles, earmuffs) according to the user's operating environment.

  • Page 12: Alteration

    A Warning: Be careful with head injuries B Warning: Squeeze danger, do not enter the machine during operation. C Danger: Pay attention to danger when the turntable rotates D Warning: Beware of falling near the turntable E Warning: Remove the strap before installation F Instruction: Label of machine G Warning: Non-professional personnel are not allowed to operate the electric cabinet, there is electrical danger...

  • Page 13: Guarantee

    Smart Wasp. Unauthorized modifications or alterations to the machine may result in serious personal injury or death. Smart Wasp is always willing to discuss improving the value of the machine by modifying it for the user. See section 1.6 2.2.5 Guarantee...

  • Page 14: Safety-Maintenance

    Please follow the general safety instructions. See section 2.2.1 · Make sure the machine and its vicinity are kept dry. · Keep away from moving parts · Do not stand on the turntable even if the machine is turned off. ·...

  • Page 15: Operating Skill

    · Please follow the general safety instructions. See section 2.2.1 · Before starting any repair: - Put the switch button in the "OFF" position - Remove the power plug - Wait at least two minutes · If the security feature is temporarily disabled, the security feature is reactivated or enabled as soon as the maintenance work is completed.

  • Page 16: Safety Features

    Notice It is the user's responsibility to ensure that the machine operators are adequately trained in their operational tasks before starting work again. 2.4 Safety features 2.4.1 Security function overview This pallet wrapping machine has the following safety features: ·Emergency stop button (Please see section 2.4.2) ·Safety marks and instructions (Please see section 2.2.3) ·Film carriage bottom safety device (Please see section 2.4.3) ·Ground lead (Please see section 2.4.4)

  • Page 17: Emergency Stop Button

    A Emergency stop button B Ground lead C and D Film carriage bottom safety device 2.4.2 Emergency stop button The emergency stop button is in the control panel. Notice In case of emergency, press the emergency stop button to stop the machine. 2.4.3 Film carriage bottom safety device The film carriage bottom anti-drop protection switch is located under the film carriage.
  • Page 18 · Keep away from operation area: Do not stay in the operating area of the machine · Risk of collision: do not stand under the film carriage · Risk of collision when starting: Do not stand disc objects when starting Nearby is danger.
  • Page 19 · Other dangerous situations at startup: When moving goods, the forklift is far away from the machine cargo...

  • Page 20: Technical Parameter Description

    3 Technical parameter description 3.1 Main component composition X500 pallet wrapping machine adopts special film to package the pallet goods. The film can be uniformly attached to the pallet goods in the pre-pull mode, and its main components are shown in the following figure.

  • Page 21: Control Panel

    3.2 Control panel 3.2.1 Main control panel Serial Name Function number It is used to operate the operation of the device and set TOUCH Touch Screen the operating parameters. Refer to section 5.7 Turn the main switch clockwise to energize the power Main power supply of the equipment.

  • Page 22: Sensor Location

    3.3 Working principle The operation of X500 standard winding machine can be completed by one operator. Its basic working principle is as follows: 1. The goods are transported by forklift to the standard wrapping machine, put on the film roller and the film is manually affixed to the first surface of the goods (See 5 operating instructions for details).

  • Page 23: Optional Configuration

    (original position). At the same time, the film carriage cooperates with the speed of the turntable to release the film. The film is wrapped on the cargo under the rotation of the turntable. 3. According to the packaging requirements of different goods, the film begins to rise after winding a certain number of turns at the bottom of the cargo.
  • Page 24 Model Machine size See the figure above X500 Film 14mic Smart Wasp Brand thickness Film paper Film width 500mm 250mm core Standard Release film Dynamic pre-stretch pre-stretch 250% mode rate Max packing Intelligent 30~40 pallets/hour standard speed sensor Max wrapping...

  • Page 25: Electrical Parameters

    Wrapping Optional Adjustable scale force X500 pallet wrapping machine turntable with existing (Φ) diameter is 1650 mm, 1800 mm and 2000 mm, the form shown in column and package of the existing high configuration: Column Total height Wrapping height（mm） （mm）...

  • Page 26: Transportation And Installation Instructions

    4 Transportation and installation instructions 4.1 Security transport Notice 1. Please note that for the transport of machines must follow general safety practices and the safety instructions given in this section. 2. The packaging material is composed of plastic film, three-ply, etc. (please follow the local advice or regulations on disposal and recycling of packaging materials) 3.

  • Page 27: Temporary Storage

    Turn the main power switch counterclockwise to turn off the machine 2. Press the emergency stop buttonRemove the power plug from the power socket Insert the forks of the forklift into the bottom of the machine and raise the machine about 50mm, as shown in the figure below Move to a new place Notice...

  • Page 28: Preparation Before Installation

    1. Protect the machine from dust 2. Store the machine in a clean, dry place. The environmental conditions required for installation also apply to storage. 3..Please don't put anything at the top of the machine. 4.4 Preparation before installation Please read the entire installation section before you start, then follow the instructions to install it step by step.

  • Page 29: Ground Confirmation

    · Leave some space around the machine for daily operation, maintenance and repair. · To get the machine running at its best, place the machine on a flat surface. If necessary, level the machine with a gasket. 4.4.2 Ground confirmation The ground must be able to withstand the weight of the equipment, the maximum load of the equipment and its impact, so it is required: Ground bearing capacity ≥...

  • Page 30: Loading And Unloading

    · 1-2 mechanical/electrical technicians and 1 user 4.4.5 Loading and unloading ⑴ Main body（the turntable and it’s column）Part loading, unloading and handling Equipment used: forklift. Method of operation: Use a forklift to remove the equipment and transport it to the installation site.

  • Page 31: 2Column Installation

    （1） Move the equipment to the installation area with a forklift, and remove the items used for outer packing, tying materials and fixing equipment. (2) Take out the attached tools, check whether the equipment is complete and put in order. (3) Make sure the trolley is locked on the stiffener plate of the support frame, to prevent the lifting body from colliding with the base and damaging the parts during the erection process.
  • Page 32 Figure4.5.2.1 （3）Connection between quick plug of power cord of chassis motor and reserved quick plug of column is shown in figure 4.5.2.2. Figure4.5.2.2...

  • Page 33: Film Carriage Installation

    4.5.3 Film Carriage installation （1）Unlock the trolley from the stiffener plate, and check that the cloth belt anti-loosening switch is properly pressed by the cloth belt. As shown in the figure 4.5.3.1 below. Figure4.5.3.1 (2) Turn on the power and manually reset the cart to the lower limit. Rotate the main power switch to turn off the machine as shown below.
  • Page 34 Figure4.5.3.2 Manually hang the film carriage from the outside of the column on the trolley, and pay attention to lead the connecting wire to the lifting body through the threading hole below the hanger plate. Use the corresponding installation bolt to lock the film carriage and the trolley. As shown in the figure below.

  • Page 36: 4Broken Film And Blocking Installation

    Figure4.5.3.4 （6）Close the membrane seat safety plate and rotate the membrane seat safety plate screw into the elongated hole. （7）Turn the power on, manually reset the film carriage to the lower limit, then turn off the equipment and disconnect the power. 4.5.4Broken film and blocking installation...
  • Page 37 （1）Place the film cutting system vertically on the turntable (be careful to handle it carefully to avoid scratching or damaging parts), align the holes of the film cutting system mounting block with the threaded holes on the turntable, and use M8*25 hexagon socket head screws to break The membrane device is installed and locked on the turntable as shown in Figure 4.5.4.1.
  • Page 38 Figure 4.5.4.2 Rest the film cutting system (3)The mechanism of the stopper has been debugged and installed on the chassis before leaving the factory as shown in Figure...

  • Page 39: Column Door Installation

    Figure 4.5.4.3 Blocker 4.5.4 Column door installation Schematic diagram of the column door installation process. Note the installation sequence of the door as shown in figure 4.5.4.1...

  • Page 40: Operating Instructions

    Figure4.5.4.1 Operating instructions 5.1 Safety instructions...

  • Page 41: The Task Of The Operator

    Notice Strictly follow the operating safety procedures (see section 2) and the instructions given in this chapter. 5.2 The task of the operator 1. Turn on the machine. See section 5.3. 2. Install and replace film. See Section 5.4. 3. Put a pallet on the turntable. See section 5.5. 4.
  • Page 42 Notice Please use the same type of film roll as given in section 3.5.1. 1. Lift the handle (B) up to open the film carriage door (A). 2. Place the stretch film on the film roll holder (C). 3. Pull out the stretch film through the guide roller (D) as indicated on the diagram at the top of the film roll.

  • Page 43: Place Pallet Instructions

    5.5 Place pallet instructions The operation of the standard wrapping machine can be done by an operator, and the basic flow is shown in the following figure. 1.Please first make sure there are no people or obstacles within 1 meter of the machine. 2.The pallets are transported by forklift to machine and placed it as far as possible in the center of the turntable.

  • Page 44: Turn On The Equipment

    After the pallet is placed, the wrapping film needs to be manually placed on the machine film roll holder. The operation flow is shown in the figure below. 1.After the film roll is placed, manually stretch the film to a sufficient length. 2.Make the film unfold.

  • Page 45: Turn Off The Equipment

    Notice In the wrapping process, the machine can be paused. 5.8 Turn off the equipment If you don't use the machine for a long time, please shut down the machine. Turn the right switch counterclockwise. 5.9 Touch screen homepage 1.Click to enter the system to enter the touch screen operation 2.Touch screen password：...
  • Page 46 Name Icon Descriptions in single layer Wrap ping The wrapping number of stretch film required at the top mode (reference value is 2) settin The wrapping number of stretch film required at the bottom (reference value is 2) The number of times the pallets are wrapped up and down (reference value is 1) This value indicates the time to continue rising after detecting the height of the cargo (reference value of 2.5).

  • Page 47: Pause Packaging (Normal Stop)

    Down speed: the descending speed of film carriage Basic operat Start: Control machine runs automatically button Pause: pause the current action of the machine. Press any button to end the pause state Reset: 1. Move the device to the origin position, and the device can be started only at the origin position 2.

  • Page 48: Stop In Automatic Mode (Emergency Stop)

    stop. 2. Restore the package state by pressing any one of the start buttons. Notice After pressing the Pause button and starting again,the machine will continue to run from where it left off until the packaging process is completed. 5.11 Stop in automatic mode (emergency stop) In emergency circumstances: Press the emergency stop button (B).

  • Page 49: Reset To The Origin Position

    5.12 Reset to the origin position When the turntable is not at the origin position: Press the reset button the machine will automatically reset to the home position. 5.13 Select packaging mode...
  • Page 50 1. Press can switch between modes 2.After switching to the selected mode, press the home page to select the...

  • Page 51: Manual Operation

    corresponding mode and write the corresponding parameters into the automatic screen and return to the home page. 3.Press will appear the single and multi-layer mode settings screen 4.Press can shield the top of the film 5.Press shielded pressurization 6.Press can select photoelectric induction height measurement and multi-layer height setting height measurement 5.14Manual operation select manual operation mode from the screen:...

  • Page 52: Setting Overview

    The speed of manual operation is set above the corresponding button. 5.15 Setting overview...

  • Page 53: Maintenance And Repair Instructions

    Name Icon Description Wrapping number statistics Count statistics System parameter setting, password System is required to enter, operator setting parameter is prohibited Device Language switching, alarm information, Information IO monitoring, version information Login Display current user login status status Homepage Return to the automatic page 6 Maintenance and repair instructions 6.1 Safety instructions...

  • Page 54: End Maintenance Check

    - Wait at least two minutes 6.3 End maintenance check 1. After the maintenance work is completed, please reactivate or enable (temporarily) disable the features of the security facility immediately. 2. After cleaning the machine, please check whether the safety facilities function can be used normally before production.

  • Page 55: Cleaning Machine

    1. Check that all safety labels and instructions are legible. 2. Check whether the wire is damaged. 3.Please check the following facilities. ·Emergency stop button（Please see section 2.5.2） ； ·Safety switch for film carriage door（Please see section 2.5.3） ； ·Safety film carriage buttom anti-drop device 6.6 Cleaning machine 1.

  • Page 56: Lubricate Film Carriage Bottom Drive Chain

    6.8 Lubricate film carriage bottom drive chain Notice Before leaving the factory, lubricating oil has been added to the drive chain of the film seat. Lubricating oil is still needed for long-term use. 1. Please refer to section 6.2 to check that the device is safe and correct. 2.

  • Page 57: Lubricate The Belt Bearing Seat

    Notice If the belt on the column is severely worn or cracked, please replace it immediately. 1. Check the safety of the system, please refer to Section 6.2. 2. Open the top coaming and open the door panel. Refer to the door panel (A) installation Transportation Installation...

  • Page 58: Lubricate The Turntable Drive Chain

    6.11 Lubricate the turntable drive chain Before leaving the factory, lubricating oil has been added to the drive chain of the film seat. Lubricating oil is still needed for long-term use. 1. Check that the system is safe and correct, please refer to Section 6.2.

  • Page 59: Check The Chain Tension Of The Turntable Drive Chain

    4. Tighten the four fasteners (A). 5. Check the tension of the transmission chain again. 6. After the adjustment is completed, proceed in the reverse order to reinstall the removed parts. 6.12 Check the chain tension of the turntable drive chain Check that the system is safe, please refer to section 6.2 Loosen the 4 fasteners (A) on the turntable (B).

  • Page 60: Safety Precautions

    7.1Safety precautions Notice Strictly observe safety regulations Please refer to section 2.2.11 for repair and troubleshooting. 7.2 Troubleshoot 7.2.1 Touch screen (HMI) alarm condition description The possible causes of the alarm information prompted by the touch screen and the solutions to be taken are as follows.
  • Page 61 PLCI1. O is on or not, and if not, replace the anti-pressure switch. 1) The travel switch is not in the center of the belt. 1) Adjust the center of the 2) The mounting between belt and travel switch Belt anti-loose switch the membrane seat and 2) Remove the mounting abnormal alarm...

  • Page 62: Description Of Inverter Alarm

    Manual mode Manual mode is prohibited Wait until the automatic run prohibited when the when machine complete then machine is running in running automatically manually operate it. automatic mode. 1) The safety door of the 1) Check that the safety film seat is open.
  • Page 63 faults. r0949 = 22: Hardware reported • Motor parameters must match the motor in use. • Value of stator resistance (P0350) must be correct. • Motor must not be obstructed or overloaded. • Increase ramp-up time (P1120) • Reduce starting boost level (P1312) •...
  • Page 64 default value • Surrounding temperature too high? • Fan must turn when inverter is running • Inverter overload Check the following: • Insufficient ventilation • Is the load or duty cycle too high? Inverter • Pulse frequency is too high •...
  • Page 65 stop 3. Press the "OK" button of the inverter • Motor power does not correspond to the A501 See F1. inverter Current limit power • Motor leads are too long • Earth faults • Small motors (120 W) under FCC and Use V/f operation for very small light load motors...

  • Page 66: Mechanical Common Faults And Elimination

    Motor overload. • A511 Independently of the kind of Load cycles or load steps too high. • Motor temperature determination check: overtemperatur • P0604 motor temperature warning threshold • P0625 motor surrounding temperature • Check if name plate data is correct.
  • Page 67 2. Open the turntable, replace the chain, adjust the chain tension 1.Place the equipment on the flat ground and ensure the floor is clean. 2.Reinstall the bottom roller or replace it. 1.The machine is placed on 3.Filling of lubricating oil. Details refer uneven ground Abnormal noise or to Maintenance instructions.

  • Page 68: Appendix

    broken hole inconsistent with the turntable 2.Adjust the motor speed (Please see 5 speed. Operating Instructions for details) 1.film carriage power drum 1.Check the circuit and exchange U2/V2 Film carriage roller reversal if necessary reverse rotation 2. The film is not tensioned 2.Tightening film to prevent returning during operation.

  • Page 74: Component Breakdown Diagram And Detailed List

    8.2 Component breakdown diagram and detailed list 8.2.1 Turntable decomposition diagram and schedule...
  • Page 75 Workpiece number Workpiece name Quantity 9XXDI000087 M-type turntable welding basics...
  • Page 76 (simple version) 9XXDI000048 Right swing arm welding 9XXDI000081 Cover plate welding 9XXDA000018 Motor mounting plate welding parts 9XXDI000047 Left swing arm welding 9XXDI000026 Turntable welding 9XXDI000150 Turntable roller assembly 9XXDI000149 Rubber wheel drive components 9XXDI000042 Transition sprocket Circlip for shaft Circlip for hole 9XXDI000036 Shaft sleeve...
  • Page 77 9XXDI000067 Stopper cover 9XXDI000068 Motor sprocket gland JJGLM000027 Square nut M6 9XXDI000091 Sensor bracket CV type vertical aluminum housing JDJJL000013 geared motor JQTQT000108 Chain A10 9XXDA000008 Gland 9XXDI000084 Side cover 1 9XXDI000085 Side cover 2 DKGJJ000008 Cylindrical proximity switch...

  • Page 78: Column Exploded View And Detail List

    8.2.2 Column exploded view and detail list 1）Column installation exploded view Workpiece number Workpiece name Quantity 9XXLG000273 Side door (new) 9XXLG000106 Rear door panel 9XXLG000193 Lifting power unit (lifting motor) 9XXLG000100 Light guide plate 9XXLG000101 Light box 9XXLG000145 Wheel mechanism 9XXLG000168 Top coaming welding piece 9XXLG000273...
  • Page 79 2）Breakdown diagram of lifting car Workpiece number Workpiece name Quantity 9XXLG000141 Guide wheel assembly JDJJL000004 Lift car motor 9XXLG000200 Film carriage main power sprocket (18 teeth) DKGJJ000001 Proximity switch (normally open) 9XXLG000214 Counting switch mounting bracket 9XXLG000135 Take-up wheel assembly...

  • Page 80: Film Carriage Exploded View And Detail List

    8.2.3 Film carriage exploded view and detail list 1)Exploded view of the assembly of the micro-movement film seat (with electromagnetic cutting) Workpiece number Workpiece name Quantity 9XXSD000100 Micro-movement film carriage door body 9XXSE00010 Film seat cutting module...
  • Page 81 9XXSE000111 Main frame of membrane 2)Exploded view of the door body of the micro-movement membrane seat Workpiece number Workpiece name Quantity 9XXSE000106 Film carriage door 9XXSE000104 Micro-motion induction roller mounting frame 9XXSA000068 Film carriage door handle 9XXSA000071 Film seat guide film roller(L523) 9XXSE000102 Film seat guide film roll up fixing piece 9XXSE000103...
  • Page 82 JJGLD000225 Contour screw Φ8-L35-M6 9XXSA000063 Door handle reset torsion spring 9XXSA000014 Handle shaft copper sleeve JJGLD000224 Contour screw Φ8-L20-M6 9XXSA000006 Door shaft copper sleeve 9XXSB000006 Proximity switch holder 9XXSA000062 Observation board JJGLD000226 Contour screw Φ12-L20-M10 DKGJJ000001 Proximity switch (normally open) JJGLM000018 Lock nut M6 JJGLD000080...
  • Page 83 Workpiece number Workpiece name Quantity 9XXSD000012 Film carriage cutting bracket welding 9XXSD000003 Broken film cover 9XXSD000006 Broken film blade 9XXSD000002 Broken film connecting rod JQTDC000001 Broken film electromagnet JJGLD000062 Hexagon socket flat head screw M3X8 JJGPD000006 Flat washer M3X0.5 JJGPD000001 Flat washer M5X1 JJGLM000004 Hex nut M5...
  • Page 84 4)Partially exploded view of film carriage main frame Workpiece number Workpiece name Quantity 9XXSE000112 Main frame and top plate welding 9XXSE000121 Safety board 9XXSA000138 Film seat film guide roller (L607) 9XXSA000058 Transmission from sprocket 1 (35 teeth) 9XXSA000127 Transmission from sprocket 2 (12 teeth) 9XXSA000041 Tension sprocket...
  • Page 85 9XXSA000061 Straight push mechanism roller 9XXSA000055 Film roll bottom gasket 9XXSA000056 Fixed sleeve under film roll 9XXSA000057 Film roll column top fixing piece 9XXSA000003 Door opening limit bushing 9XXSA000002 Door opening limit plate 9XXSA000134 Photoelectric switch bracket 9XXSC000003 Heightening membrane seat cover fixing column 9XXSC000009 New model membrane seat top cover JJGLD000224...

  • Page 86: Clamping And Cutting Film Exploded View And Schedule

    JJGLD000043 Hexagon socket head screw M8X16 JJGTD000004 Elastic washer M6X1.6 JJGLD000032 Hexagon socket head screw M4X30 JJGTD000002 Elastic washer M4X1.1 JJGTD000001 Elastic washer M3X0.8 JJGPD000002 Flat washer M6X1.6 JJGLD000244 Hexagon socket flat head screw M6×20 9XXSE000089 Little Hornet Film Roll JZCDZ000048 Bearing with seat JJGLD000236...
  • Page 87 Workpiece number Workpiece name Quantity 9XXAA000055 1650 broken film frame welding parts Hexagon socket countersunk head screw JJGLD000248 M8×16 Hexagon socket countersunk head screw JJGLD000253 M6×12 9XXAA000068 Belt tensioner fixed shaft 9XXAA000069 Tension torsion spring 9XXAA000070 Belt tensioning fixed sleeve JJGLD000251 Hexagon socket head screw M6×16 9XXAA000071...
  • Page 88 JJGPD000014 Enlarged flat pad Φ6×25×2 JJGLD000255 Hexagon socket head screw M6×45 4) Broken film assembly Workpiece number Workpiece name Quantity 9XXAA000053 1650 broken film frame assembly JJGLD000264 Hexagon socket head screw M8×30 JJGPD000003 Flat washer M8X1.6 JJGTD000005 Elastic washer M8X2.1 9XXAA000141 Device right fixed foot JJGLD000268...

  • Page 89: Spare And Wearing Parts

    9XXAA000018 Broken film follower bushing JJGLD000251 Hexagon socket head screw M6×16 JJGLM000005 Hex nut M6 9XXAA000112 Device left fixed foot JJGTD000003 Elastic washer M5X1.3 9XXAA000080 Conversion belt JJGLD000266 Hexagon socket head screw M5×12 9XXAA000114 Belt pressure pad 9XXAA000154 Belt press JJGLD000256 Hexagon socket head screw M3×16 JJGTD000001...

Table of Contents