Assembly The System Of Order ( Fig.6, 7 And 8 ) - SATAM XAD 36 Disassembly And Reassembly

1.7

Assembly the system of order ( Fig.6, 7 and 8 )

- Assembly 2 o'rings (18) on the axle (19).
- Put grease on the hole of the body.
- Installation of the lever of order (20).
- Installation of the axle (19).
- Assembly the pin (21).
- Assembly the cover (22) with his gasket (23).
- Assembly the lever (24) and to fix the pin.
- Control of functioning.
- Assembly the spring of the valve (25), the valve (26) and the seat of valve (27) after
having lubricated the joints.
- Installation of the valve.
- Installation of the case of order.
- Control mechanical operation without hard point.
Le 17/02/09
to make sure that there are no arrises on the axis which can cause the
deterioration of the joints.
To fix the whole by 4 discs and 4 screws.
No hard point must be detected during the use of the lever.
9/9 U508103-e Révision : 3