Page 1
Metal Garden Bed Instructions for Assembly Size: L39.3"xW39.3"xH30" 9820501 Requires two people and takes hour for lnstallation. Quick & Easy Assembly Ridge Reinforced Walls Available in Various Sizes...
Page 5
P4 x 2 P2 x 6 (4 panels for one wall) Wall Panels Assembly Hook the 4 panels together and lay down them on flat ground P4 is the Top Panel The shape is different from that of P2. Assembly P4 & P2 via hooking them together by the hook edge of P2.
Page 6
F1x 20 C1 x 4 Corner Posts Assembly Please notice the posts are assembled on the two short edges of assembled wall panel. Attach the corner post C1 to the assembled wall panel in previous step. Ensure the edges of panels are all contented in the groove of profile of corner post C1.
Page 7
P4 x 2 P2 x 6 Wall Panels Assembly Repeat the wall panels assembly for other two side walls.
Page 8
Wall Panels Combination F1x 10 P2 P2 P2 P2 Finish the installation for other 2 walls. Then insert them into the groove of the corner post assembled with the first wall panel. Fix the 3 walls together with 10 pieces F1 screws. Please note the pre-drilled holes for F1 screw tapping is on the inside surfaces of corner posts.
Page 9
All wall panels and corner posts assembly F1x 10 Fix the last wall panels with 10 pieces screws. There are pre-drilled holes for screwing.
Page 10
Reinforcing Ribs Installation Corner Caps Installation S5 x 8 C x 2 Corner Cap 8 pieces total Folding the top of C1 and make 4 pieces on top Reinforcing ribs C it in "T" the shape. 4 pieces on bottom Fix the reinforcing ribs with F1 screws,2 pieces on each end.
Page 11
Wall panels screwing F1x 16 Reinforcing the wall panels with 16 pieces F1 screws on the connecting places where there are pre-drilled holes inside of the wall panels.
Page 13
Snail Border for 9820501 Garden Bed Instructions for Assembly 9820501-SB...
Page 15
Tools may needed Use heavy duty gloves when handling steel sheets and flashing Qty. Part List 1121 mm 44"...
Page 16
F7 x 8 2 x 4 Snail Border Installation Joint each corner of border with 2 pieces F7 screws.
Page 17
Snail Border & Plant Bed Combination Overturn the snail border and cover it onto the plant bed.
Page 18
F1x 8 ST4 x 8 Snail Border & Plant Bed Fixation Fix the snail border with 8 pieces F1 screws on the middle of border where there are Fix the snail border on plant bed with 8 pre-drilled holes. pieces ST4 self-tapping screws at the corners.2 pieces screws needed each corner.