Page 1
Metal Garden Bed Instructions for Assembly Size: L78.7"xW39.3"xH30" 9820503 Requires two people and takes hour for lnstallation. Quick & Easy Assembly Ridge Reinforced Walls Available in Various Sizes...
Required Tools Qty. PART 754mm 29.7" 984mm 38.7" 1947 mm 76.6" 1947 mm 76.6" 947 mm 37.2" 947 mm 37.2" Use heavy duty gloves when handling steel sheets and flashing...
Page 5
P3 x 2 P1 x 6 Wall Panels Assembly (4 panels for one wall) Hook the 4 panels together and lay down them on flat ground P3 is the Top Panel The shape is different from that of P1. Assembly P3 & P1 via hooking them together by the hook edge of P1.
Page 6
F1x 20 C1 x 4 Corner Posts Assembly Please notice the posts are assembled on the two short edges of assembled wall panel. Attach the corner post C1 to the assembled wall panel in previous step. Ensure the edges of panels are all contented in the groove of profile of corner post C1.
Page 7
P4 x 2 P2 x 6 Wall Panels Assembly Repeat the wall panels assembly for other two side walls.
Page 8
Wall Panels Combination F1x 10 P2 P2 P2 P2 Finish the installation for other 2 walls. Then insert them into the groove of the corner post assembled with the first wall panel. Fix the 3 walls together with 10 pieces F1 screws. Please note the pre-drilled holes for F1 screw tapping is on the inside surfaces of corner posts.
Page 9
All wall panels and corner posts assembly F1x 10 Fix the last wall panels with 10 pieces screws. There are pre-drilled holes for screwing.
Page 10
Reinforcing Ribs Installation Corner Caps Installation C x 4 S5 x 8 F1x 40 Folding the top of C1 and make it in "T" the shape. Corner Cap 8 pieces total Reinforcing ribs C 4 pieces on top 4 pieces on bottom Fix the reinforcing ribs with F1 screws,2 pieces on each end.
Page 11
Wall panels screwing F1x 20 Reinforcing the wall panels with 20 pieces F1 screws on the connecting places where there are pre-drilled holes inside of the wall panels.
Page 13
Snail Border for 9820503 Garden Bed Instructions for Assembly 9820503-SB...
Tools may needed Use heavy duty gloves when handling steel sheets and flashing Qty. Part List 2121 mm 83.5" 1121 mm 44"...
Page 16
F7 x 8 2 x 2 1 x 2 Snail Border Installation Joint each corner of border with 2 pieces F7 screws.
Page 17
Snail Border & Plant Bed Combination Overturn the snail border and cover it onto the plant bed.
Page 18
ST4 x 8 F1x 12 Snail Border & Plant Bed Screwing Fix the snail border with 12 pieces F1 screws on the middle of border where there are Fix the snail border on plant bed with 8 pre-drilled holes. pieces ST4 self-tapping screws at the There are 4 pre-drilled holes on the corners.2 pieces screws needed each corner.