BenQ TW526E User Manual page 53

FUNCTION
Picture Mode
Reference
Mode
Brightness
Contrast
Color
Tint
Sharpness
DESCRIPTION
Pre-defined picture modes are provided so you can optimize your
projector image set-up to suit your program type. See
a picture mode" on page 36
Selects a picture mode that best suits your need for the image
quality and further fine-tune the image based on the selections
listed on the same page below. See
mode" on page 36 for details.
Adjusts the brightness of the image. See
on page 37 for details.
Adjusts the degree of difference between dark and light in the
image. See"Adjusting Contrast" on page 37
Adjusts the color saturation level -- the amount of each color in a
video image. See "Adjusting Color" on page 37
This function is only available when a Video or S-
Video signal is selected.
Adjusts the red and green color tones of the image. See
"Adjusting Tint" on page 37
This function is only available when a Video or S-
Video signal is selected and the system format is
NTSC.
Adjusts the image to make it look sharper or softer. See
"Adjusting Sharpness" on page 38
This function is only available when a Video or S-
Video signal is selected.
for details.
"Setting the User 1/User 2
"Adjusting Brightness"
for details.
for details.
for details.
"Selecting
for details.
Operation 53