Icom IC-GM1600 Instruction Manual page 18

Survival craft 2-way radio

Hide thumbs Also See for IC-GM1600:

Table of Contents

SET MODE

D Auto power save function "PS"

The auto power save function reduces battery drain by deac-

tivating the receiver circuit for preset intervals.

• ON : The power save function is turned ON. The power save func-

tion will activate when no signal is received, and no operation

is performed for 5 sec.

• OFF: The power save function is turned OFF.

Power save ON

(default)

Push

Power save OFF

D Self check function "SC"

The self check function checks the transceiver conditions by

itself, and informs you in case a problem is found. Self check

automatically and quickly runs through its diagnostic steps

each time the radio is turned ON. Afterwards, the radio

switches to normal operation mode.

• Temperature : Outside of –35°C to +80°C; –31°F to +173°F

(approx.)

• Connected battery voltage

Push

Self check OFF (default)

When error messages as shown below are displayed, see

troubleshooting for advice. (p. 24)

Temperature error

Self check ON

Battery voltage error

Table of Contents

Need help?

Do you have a question about the IC-GM1600 and is the answer not in the manual?