Download Print this page
KALOS KLEH122 Assembly Instructions Manual

KALOS KLEH122 Assembly Instructions Manual

Universal electric lantern heater – 65cm & 80cm

Advertisement

Quick Links

Assembly Instructions
Universal Electric Lantern
Heater – 65cm & 80cm
KLEH122/KLEH123-0300
IMPORTANT
PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE.
THIS IS IMPORTANT INFORMATION REGARDING THE USE AND
CARE OF YOUR HALOGEN HEATER.
Sept 2020

Advertisement

loading

Summary of Contents for KALOS KLEH122

  • Page 1 Assembly Instructions Universal Electric Lantern Heater – 65cm & 80cm KLEH122/KLEH123-0300 IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR HALOGEN HEATER. Sept 2020...
  • Page 2 Important Information Unpack the halogen heater making sure that all the items are present and that there are no components left in the box and that the heater head is free from any packing material. Using the detailed drawing follow the steps to assemble your halogen heater. DO NOT connect the halogen heater to the electrical supply until all the assembly is complete.
  • Page 3: For Your Safety

    For Your Safety Warning • This heater is not equipped with a device • Children of less than 3 to control the room temperature. years should be kept away unless use this heater in small rooms when continuously supervised. they are occupied by persons not capable •...
  • Page 4 For Your Safety DO NOT DON’T move when connected to an wrap the power supply cord on electrical supply and always wait for the unit. the patio heater to cool down before 19. The unit must be handled with care, and storing away.
  • Page 5: Technical Specification

    For Your Safety & Technical Specification 32. One dark point may exist on the surface of the heating elements during the This warning symbol first few minutes after it is turned on. indicates that the surface is This is normal, and will not affect the hot and caution is required.
  • Page 6: Troubleshooting

    Operation Instructions • Connect the power cable to a 13 amp supply that is located in a safe, dry area. • Press the power switch on the heater when the plug had been connected. • Press the touch switch one time to operate the heater on 1500W.
  • Page 7 Notes...
  • Page 8: Maintenance And Care Instructions

    Maintenance and Care Instructions • When disconnected from the electrical supply, clean the outside of the patio heater with a damp cloth. Never use corrosive or solvent cleaners or immerse in water. • Any maintenance or repairs including replacing the halogen tube should only be carried out by a qualified electrician or by a recommended service center.

This manual is also suitable for:

Kleh123-0300