Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for KALOS KLEH143-0400
Summary of Contents for KALOS KLEH143-0400
- Page 1 Assembly Instructions Copper Floor Standing Heater KLEH143-0400 IMPORTANT PLEASE KEEP THIS BOOKLET FOR FUTURE REFERENCE. THIS IS IMPORTANT INFORMATION REGARDING THE USE AND CARE OF YOUR HALOGEN HEATER. ASSEMBLY PERSONS TIME REQUIRED Sept 2020...
- Page 2 Important Information Unpack the halogen heater making sure that all the items are present and that there are no components left in the box and that the heater head is free from any packing material. Using the detailed drawing follow the steps to assemble your halogen heater. DO NOT connect the halogen heater to the electrical supply until all the assembly is complete.
-
Page 3: For Your Safety
For Your Safety Warning • This heater is not equipped with a device • Children of less than 3 years to control the room temperature. should be kept away unless continuously use this heater in small rooms when supervised. they are occupied by persons not capable •... - Page 4 For Your Safety DO NOT Site the heater outside or in a large touch the heater head when open area and well away from any in use. obstructions such as branches or where DO NOT leave turned on and the heater is near any objects that can unattended especially when children be effected by heat, such as furniture, and or animals are in the vicinity.
- Page 5 For Your Safety 20. The unit must be securely grounded DON’T immerse this unit into water for during operation. cleaning. 21. If the unit gets damaged, it must be 35. The unit should be plugged in a socket, repaired by professional electricians with which is easily visible and reachable.
- Page 6 Assembly . Connect 2 pcs the . Fix the heater on the base by 6PCS M6 * 10mm screws middle tube and 1 pc with M6 spanner. bottom tube onto the heater by screwing them together...
- Page 7 Assembly . Swing the heater to the angle M6 x 12 screw you need, Then lock it with 2pcs M4*12mm screws . Pull the power cord gently out of the base as much as possible. Fix the power cord under the base using the supplied 2 pcs of M4*12mm screws.
-
Page 8: Operation
Operation Place the heater on a firm, level surface and plug into a grounded 220V-240V 50Hz power outlet. Only operate the heater when it is in the upright position and the base is attached. Electric halogen patio heater is equipped with 3 heating settings: Low, Medium and High. . -
Page 9: Care And Maintenance
Operation Care and maintenance • Unplug the heater and let it cool completely • When disconnected from the electrical supply, clean the outside of the heater with a damp cloth. Never use corrosive or solvent cleansers or immerse in water. Wait until the unit is completely dry before use. - Page 10 Notes...
- Page 11 Notes...
-
Page 12: Maintenance And Care Instructions
Maintenance and Care Instructions • When disconnected from the electrical supply, clean the outside of the patio heater with a damp cloth. Never use corrosive or solvent cleaners or immerse in water. • Any maintenance or repairs including replacing the halogen tube should only be carried out by a qualified electrician or by a recommended service center.
Need help?
Do you have a question about the KLEH143-0400 and is the answer not in the manual?
Questions and answers