Table of Contents
Advertisement
35
Commissioning the eBox
Commissioning the eBox
After the preceding steps, you can switch in the voltage.
Bear in mind that the eBox does not light up until you have approached it within one
metre. You will be prompted to link to the eBox via Bluetooth. To make this work, you need
either the eConfig app or WebConfig. The eConfig app is the easiest way to commission
the eBox. If you want to perform one or more of the following steps during commissioning,
please use WebConfig:
• Firmware Update
• Read out log files
• SIM card settings
• Standard config data upload
System commissioning must be carried out by an electrician.
I.) Configuring via eConfig app
You can download the required app via the following QR codes:
Advertisement
Table of Contents
Need help?
Do you have a question about the eClick and is the answer not in the manual?