Table of Contents
Advertisement
Battery Pack Checkout:
high-capacity battery have a problem, refer to the following:
1.
Enter suspend mode by pressing the Power button.
2.
Remove the battery pack and check for any
mechanical damage. Replace the battery pack if it is
damaged.
Note:
3.
Remove the battery pack and measure the voltage
between the battery terminals. See the following
figure:
1
7
Terminal
1
7
4.
If the voltage is less than 11.1 V dc, the battery pack
has been discharged. Recharge the battery pack.
If the voltage is still less than 11.1 V dc after
recharging, replace the battery pack.
If the battery pack is extremely hot (over 50°C),
replace the battery pack and the mainboard.
If the voltage is correct, but you still suspect a
problem with the battery pack, go to "Running the
Diagnostics Test" on page 27.
Damage to the battery pack caused by the
customer is not covered by the warranty.
WorkPad z50 Mobile Companion
If the battery pack or the optional
Voltage (V dc)
11.1 V
Ground (-)
11
Advertisement
Table of Contents
