ALDI WORKZONE User Manual page 9

AIR FORCE
ADDITIONAL SAFETY INSTRUCTIONS
Safety instructions for working with compressed air and blasting guns
The compressor pump and lines can become very hot during operation.
•
Touching these parts will burn you.
The air which is sucked in by the compressor must be kept free of impurities
•
that could cause fires or explosions in the compressor pump.
When releasing the hose coupling, hold the hose coupling piece with your hand.
•
This way, you can protect yourself against injury from the rebounding hose.
Wear safety goggles when working with the blow-out pistol. Foreign bodies or
•
blown off parts can easily cause injuries.
Do not blow at people with the blow-out pistol and do not clean clothes while
•
being worn. Risk of injury!
Safety information for paint spraying
Do not process any paints or solvents with a flash point below 55° C.
•
There is a risk of explosion!
Do not heat up paints or solvents. There is a risk of explosion!
•
If hazardous liquids are processed, wear protective filter units (face guards).
•
Also, adhere to the safety information provided by the manufacturers of such
liquids.
The details and designations of the Ordinance on Hazardous Substances,
•
which are displayed on the outer packaging of the processed material, must be
observed.
Additional protective measures are to be undertaken if necessary, particularly
•
the wearing of suitable clothing and masks.
Do not smoke during the spraying process and/or in the work area. There is a
•
risk of explosion! Paint vapors are easily combustible.
• Never set up or operate the equipment in the vicinity of a fire place, open lights
or sparking machines.
Do not store or eat food and drink in the work area. Paint vapors are harmful to
•
your health.
The work area must exceed 30 m
•
during spraying and drying. Do not spray against the wind. Always adhere to the
regulations of the local police authority when spraying combustible or
hazardous materials.
Do not process media such as white spirit, butyl alcohol and methylene chloride
•
with the PVC pressure hose. These media will destroy the pressure hose.
DO NOT LOSE THESE SAFETY INSTRUCTIONS
AFTER SALES SUPPORT
1300 855 831

and sufficient ventilation must be ensured
3
MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018
Safety information/
 support@scheppach.com.au
AUS
13