Storage - ALDI WORKZONE User Manual

AIR FORCE
m Important!
Always de-pressurize the equipment before carrying out any cleaning and
maintenance work! Risk of injury! To do so, use the tyre pressure gauge as a
blow-out pistol and press the trigger lever until no more air escapes.
11.1 Cleaning
Keep the equipment free of dirt and dust as far as possible. Wipe the equipment
•
with a clean cloth or blow it down with compressed air at low pressure.
We recommend that you clean the equipment immediately after you use it.
•
Clean the equipment regularly with a damp cloth and some soft soap. Do not
•
use cleaning-agents or solvents; these may be aggressive to the plastic parts in
the equipment. Ensure that no water can get into the interior of the equipment.
You must disconnect the hose and any spraying tools from the compressor be-
•
fore cleaning. Do not clean the compressor with water, solvents or the like.

12. Storage

m Important!
Pull out the mains plug and ventilate the equipment and all connected pneumatic
tools. Switch off the compressor and make sure that it is secured in such a way that
it cannot be started up again by any unauthorized person.
m Important!
Store the compressor only in a dry location which is not accessible to unauthorized
persons.
Releasing excess pressure
Release the excess pressure by switching off the compressor and using the com-
pressed air which is still left in the pressure vessel, e.g. with a compressed air tool
running in idle mode or with a blow-out pistol.
AFTER SALES SUPPORT
1300 855 831

MODEL: AIR FORCE PRODUCT CODE: 56102 02/2018
Maintenance&Cleaning / Storage
 support@scheppach.com.au
AUS
19