IBM ThinkPad Z61 Supplementary Manual page 47

16. In the device listing on the Device Manager window, a yellow mark may
appear at the left side of the Universal Serial Bus (USB) controller. If it
does appear, open its properties and click the Reinstall driver button to
install the USB2.0 driver.
17. Restore C:\IBMTOOLS or C:\SWTOOLS from the backup copy you
made before starting the installation.
18. Run the Intel Chipset Support 5 for Windows 2000/XP. To do this, run
infinst_autol.exe in either C:\IBMTOOLS\OSFIXES\INTELINF\ or
C:\SWTOOLS\OSFIXES\INTELINF\.
Note: If you cannot find this directory on your hard disk drive,
download the Intel Chipset Support 5 for Windows 2000/XP from
the ThinkPad Web site at
http://www.lenovo.com/think/support/site.wss/TPAD-
MATRIX.html
19. Follow the instructions for the Install shield program.
20. Install Windows 2000 device drivers and application software by
referring to its procedure.
Note: If you cannot find the Supplement files, device drivers, and
application software you need on your hard disk drive, or if you
want to receive updates and the latest information about them,
refer to the ThinkPad Web site at
http://www.lenovo.com/think/support/site.wss/TPAD-
MATRIX.html
If you do not have a diskette drive, you can install Intel Matrix Storage
Manager Driver by the following alternative procedure:
Note
If you select AHCI for Serial ATA (SATA) in the BIOS Setup Utility
before installing Intel Matrix Storage Manager Driver, your computer
will not respond; it will only display a blue screen.
1. Start the BIOS Setup Utility menu.
2. Select Config.
3. Select Serial ATA (SATA).
4. Select Compatibility.
5. Change the startup sequence of your computer. Following the
instructions on the Startup menu in the BIOS Setup Utility, set the
CD-ROM drive to start first.
6. Insert the CD for Windows 2000 into the CD or DVD drive, and restart
the computer. Follow the instructions on the screen.
Installing a new operating system
Chapter 5. Installing a new operating system
39