Table of Contents
Advertisement
Note: If you use the Fn+F7 key combination to apply a presentation
scheme, press Fn+F7 at least three times in three seconds, and
the image is displayed on the computer screen.
Problem:
The computer does not return from standby mode, or the standby
indicator stays on and the computer does not work.
Solution:
→ If the system does not return from standby mode, it may have
entered standby or hibernation mode automatically because the battery
is depleted. Check the standby indicator.
– If the standby indicator is on, your computer is in standby mode.
Connect the ac adapter to the computer; then press Fn.
– If the standby indicator is off, your computer is in hibernation mode
or power-off state. Connect the ac adapter to the computer; then
press power button to resume operation.
If the system still does not return from standby mode, your system
may stop responding and you cannot turn off the computer. In this
case, you need to reset the computer. If you have not saved your data,
it may be lost. To reset the computer, press and hold the power button
for 4 seconds or more. If the system is still not reset, remove the ac
adapter and the battery.
Problem:
Your computer does not enter standby or hibernation mode.
Solution:
→ Check whether any option has been selected that would disable your
computer from entering standby or hibernation mode.
Problem:
The system does not wake up at the time set on the timer, if the computer
is not connected to an ac power source, -or- The system does not enter
hibernation mode from suspend mode, if the computer is not connected to
an ac power source.
Solution:
→The timer-wake-with-battery-operation is disabled by default. If you
enable this function, the computer could wake up and begin running
while it is being carried; this could lead to damage to the hard disk
drive.
Solving computer problems
Chapter 3. Solving computer problems
21
Advertisement
Table of Contents
