Table of Contents
Advertisement
1 INSTALL TYPE
WALL
ISLAND
INSTALLATION SCENARIOS AND USE OF BACKGUARDS
2 REAR SURFACE
3 BACKGUARD OPTIONS
COMBUSTIBLE
NON-COMBUSTIBLE
(purchased separately)
MIN 6" (152MM)
CLEARANCE
NO BACKGUARD
MAX 30"
(762MM)
*Fabricated from non-combustible materials only
NO BACKGUARD
Non-combustible surfaces: as defined in 'National Fuel Gas Code'
(ANSI Z223.1, Current Edition). Clearances from non-combustible
materials are not part of the ANSI Z21.1 scope and are not certified
by UL. Clearances of less than 6" (152mm) must be approved by
the local codes and/or by the local authority having jurisdiction.
ANGLED TRIM
HIGH THICK BACKGUARD
LOW THIN BACKGUARD
CUSTOM*
BACKGUARD
MAX 1/2" (13MM)
CLEARANCE
CUSTOM* BACKGUARD
WITH ANGLED TRIM
HIGH THIN BACKGUARD
9
Advertisement
Table of Contents
