Fisher & Paykel RDV3366N Installation Manual page 10

Important notes
All ranges come fitted standard with with an Integral Flat Vent Trim.
z
There are three different backguards available for purchase:
z
Range Mount Low Backguard
z
Wall Mount High Backguard with Low Shelf
z
Wall Mount High Backguard with High Shelf, also supplied with an Angled Vent Trim.
z
For installations against non-combustible* surfaces only, you may install the range without a backguard or choose any of the three backguards.
z
For installations close to combustible surfaces (above the cooking surface), without a backguard, there must be a minimum 6" (152mm) clearance.
z
For installations immediately against combustible surfaces (above the cooking surface), you must purchase and fit the Wall Mount High Backguard
z
High Shelf and Angled Vent Trim.
Backguard model numbers
RANGE MOUNT
RANGE
LOW BACKGUARD
30" models
36" models
48" models
Note: For more information on Backguard installation, refer to the separate instructions provided with your backguard.
Backguard Installation Instructions can also be downloaded from our website, www.fisherpaykel.com
10
INSTALLATION SCENARIOS AND USE OF BACKGUARDS
WALL MOUNT HIGH
BACKGUARD LOW SHELF
BGRV2-1230 BGRV2-3030
BGRV2-1236 BGRV2-3036
BGRV2-1248 BGRV2-3048
BACKGUARD WIDTH
WALL MOUNT HIGH
BACKGUARD HIGH SHELF
BGRV3-3030H 29 7/8
BGRV3-3036H 35 7/8
BGRV3-3048H 47 7/8
IN MM
759
911
1216