Making Use Of Usb (Universal Serial Bus); Required System Environment; Connection Procedure (Setup Of Usb Function) - Eizo Foris FS2434-BK User Manual

Detaching procedure
1.
Shut the bottom of the cable holder.
2.
While holding the shut section, lift the cable holder upward to remove it from
the Stand base.

8-4. Making Use of USB (Universal Serial Bus)

This product is equipped with a USB hub. Connected to a PC compatible with USB, this monitor functions
as a USB hub allowing connection to peripheral USB devices.
Note
• This product supports USB 3.0. When connecting peripheral devices that support USB 3.0, high-speed data
communication is possible (however, only when the USB cable used to connect the PC and peripheral device is
USB 3.0 compliant).
●

Required System Environment

• A PC equipped with a USB port.
• Windows 10 / Windows 8.1 / Windows 7 / Windows Vista or Mac OS X 10.2 or later and Mac OS 9.2.2
• EIZO USB cable (UU200SS (USB 3.0))
Attention
• This monitor may fail to work depending on the PC, OS or peripheral devices to be used. For the USB
compatibility of peripheral devices, contact their manufacturers.
• When the monitor is in the power saving mode, devices connected to the USB downstream port will still
work. Therefore, the power consumption of the monitor varies with the connected devices even in the power
saving mode.
• When the main power switch is turned off, devices connected to USB downstream ports do not work.
●

Connection procedure (Setup of USB function)

1. Connect the monitor first to a PC using the signal cable, and run the PC.
2. Using the USB cable, connect the downstream port of a PC compatible with USB and the
monitor's upstream port.
The USB hub function is set up automatically upon connection of the USB cable.
3. Connect the peripheral USB device to the USB downstream port of the monitor.
USB
downstream
port
USB
upstream
port
51
Chapter 8 Reference