KBT Mobile ES807 User Manual page 52

LED Highlight (White/Red/Green/Blue/Yellow/Purple/Cyan/Off): You can set the LED
Highlight color or off with this setting. You can set LED Highlight color when you take a
picture.
Shutter Sound (Sound1/2/3/Off) : Allows you to select a shutter sound among three kinds
of shutter sounds or turn off the shutter sound. The sound makes you feel the sense of
taking a picture.
EV (-4/-3/-2/-1/0/+1/+2/+3/+4): You can set the EV (Exposure Value) and the preview will
look darker in lower EV and brighter in higher EV.
Night Mode (On/Off) : Turn on this function in the dark place.
Banding (60Hz/50Hz): You can select the sampling bandwidth of the camera sensor.
When bandwidth increases, the memory size and the picture quality will increase.
Image Setting : You can set image size and quality of your photo as following.
Image Size: 80x60 and 128x160 are available.
Image Quality (Low/Normal/High): allows you to choose the JPEG quality. The captured
image memory size will increase if you choose higher quality.
Effect Setting : Allows you to set Image effect among 7 options
Normal
Grayscale
Sepia
Color Invert
Gray Invert
Blackboard
Whiteboard
Add Frame : Allows you to set Frame among 10 options
Off
Frame 1 ~ Frame 10
Cont. Shot : It allows you to take multiple continuous shots by pressing the camera key. You
can set this function off or take 1, 3, or 5 continuous shots.
Delay Timer : It allows you to take a picture with delayed timer. If you set the delay timer at 5
sec, and press the camera key (center navigation key), it will take a picture 5 seconds later.
Off
5 sec
10 sec
15 sec
Self Capture : You can take a self shot by using this menu. Once you turn on this function, the
preview screen is shown on the sub-lcd screen.
52