Table of Contents
Advertisement
You can select the Auto Keypad Lock options from none/ 5 sec / 30 sec / 1 min / 5 min.
When the Auto Keypad Lock feature is enabled with such time, user must enter the unlock code,
which is 1, 2, and 3 in sequence, each time. You may not make a call or operate the phone if
unlock code is not entered. However, answering a call, receiving message are available without
entering the unlock code.
Press and Hold the * key to activate the keypad lock. It will show you auto keypad lock options.
Select from none/ 5 sec / 30 sec / 1 min / 5 min and press [Ok] soft key to save the setting. The
keypad lock will be activated in 5 seconds from your last key presses, when you set the Auto
Keypad Lock option to 5 sec.
4.4.3 Fixed Dial
When the Fixed Dial mode is enabled, the person using this phone can call to the phone numbers
stored in the Fixed Dial List only. To make a call to the number not starting the numbers stored in
Fixed Dial List, you must enter the PIN2 to disable Fixed Dial mode. If the SIM card does not have
PIN2, this feature is not supported.
In the Fixed Dial Mode, you can use several useful functions as following.
View and Edit: you can see and edit FDN entry after input PIN2.
Add : you can add FDN entry after input PIN2.
Delete : you can delete FDN entry after input PIN2.
SMS : you can send SMS to the phone numbers starting with the numbers stored in FDN.
Short Type : you can choose short type among Number / Name / Sequence.
4.4.4 Barred Dial
When the Barred Dial mode is enabled, the person using this phone cannot call to numbers in the
barred dial list. To make a call to the barred number, you must enter the PIN2 to disable the barred
dial mode. If the SIM card does not have PIN2, this feature is not supported.
4.4.5 Change Password
To change the password, input the current password, and then enter the new password.
4.5 Restore Factory Settings
This feature would reset the telephone to the same settings as those configured at the factory. You will
need to input password to restore factory settings.
49
Advertisement
Table of Contents
