Eizo FlexScan EV3285-BK User Manual page 27

Function
Picture Expansion
Input Color Format
Input Range
*1 Only enabled during HDMI input
*2 Only enabled during DisplayPort input or USB-C input
Setting Value
*1
Auto The screen size of the monitor display can be changed.
Full Screen • "Auto"
Aspect Ratio The monitor automatically changes the screen size
Dot by Dot according to the aspect ratio and resolution information
from the PC.
• "Full Screen"
Images are stretched to full screen. Since aspect ratios are
not maintained, images may be distorted in some cases.
• "Aspect Ratio"
Images are enlarged to full screen without changing the
aspect ratio. Since aspect ratios are maintained, blank
horizontal or vertical borders may appear.
• "Dot by Dot"
Displays the image at the set resolution or size specified by
the input signal.
Note
• Example settings
• During PinP display, the aspect ratio of the small window is
fixed and therefore the display size of the window cannot
be changed.
Auto The color format of the input signal can be specified.
*1
YUV 4:2:2 Try changing this setting if colors are not displayed correctly.
*1
YUV 4:4:4
Note
*2
YUV
• This setting is required when a DVI device is connected to
RGB
the monitor via the HDMI connector port using a DVI-HDMI
conversion connector.
Auto Depending on the PC, black and white of the video level of the
Full signal output to the monitor may be limited. If a limited signal is
Limited displayed on the monitor, black will appear faint and white will
appear dull, leading to a reduction in contrast. The output range
of such signals can be extended to match the actual contrast
ratio of the monitor.
• "Auto"
Automatically identifies the brightness range of the input
signal and displays the image accordingly.
• "Full"
Extension of the signal output range is not performed.
• "Limited"
Extends the signal output range through 0 to 255 and
displays the image.
Description
- Full Screen
- Aspect Ratio
- Dot by Dot
(input signal)
Chapter 3 Advanced Adjustment / Setting
27