Eizo FlexScan EV3285-BK User Manual page 20

Function
Auto EcoView
EcoView Optimizer 2
20
Chapter 2 Basic Adjustment / Setting
Setting
Value
On The ambient light sensor on the front of the monitor
Off detects the ambient brightness to automatically adjust
the screen brightness to a comfortable level using Auto
EcoView. The power consumption of the backlight can
be curtailed by adjusting the brightness to an appropriate
level.
This function can also mitigate eye strain and tiredness
caused by a screen that is too bright or too dark.
Note
• Be careful not to block the ambient light sensor on the
lower side of the monitor when using Auto EcoView.
• Even when the Auto EcoView setting is "On", the
operation switch on the front of the monitor or color
adjustment can be used to change the "Brightness"
to suit your personal preference. Moreover, the
manner in which the Auto EcoView function changes
brightness also differs according to the changed
value.
• When "DICOM" is selected for the color mode, the
Auto EcoView setting is turned "Off".
On The monitor automatically adjusts the screen brightness
Off
according to the white level of the input signal.
This function can reduce power consumption while
maintaining the brightness specified by the input signal.
Note
• The setting is turned "Off" in the following cases:
- When "Movie" or "DICOM" is selected for the color
mode
- During PbyP/PinP display
• When set to "On", the appearance of pale colors may
change. If this bothers you, set this function to "Off".
Description