Table of Contents
Advertisement
Rev. 2021-07-01 OkuStim System
TD60K06 -
03
Fig 1-3: OkuSpex frame
Nosebridge
Electrode holder
The OkuEl electrode is comprised of an arched clip with two fine threads, which are placed
below the pupil on the surface of the eye.
The OkuSpex frame serves as a holder for the OkuEl electrodes. It is connected to the Oku-
Stim with a cable. The OkuSpex can easily be adjusted to fit the individual facial shape.
Similarly, the OkuEl electrodes can be inserted easily into the electrode holder of the OkuSpex
frame even by visually impaired persons.
For hygienic reasons, the OkuEl electrodes and OkuEl counter-electrodes may only be used
once.
Therapy
Upon turning on the OkuStim the eyes will be electrically stimulated with the pre-set para-
meters over a time of 30 minutes. During the stimulation, the perception of white and bright
light sensations (so-called 'phosphenes') is probable.
The individual treatment parameters for the patient will be determined and programmed on
the USB-stick of the OkuStim device by a healthcare professional.
The data generated during stimulation, such as electrical resistance values, are stored on the
USB-stick. This way the healthcare professional can monitor the course of the therapy.
The OkuStim device features a display and acoustic output for all essential operating states,
so that patients at advanced stages of visual impairment can use the device without problems.
Instructions for Use
Support bars
Counter electrode connector
9 36
Advertisement
Table of Contents
